Hi Everyone, I recently found a couple USRP2's that have not been used for some time in my lab, and decided to use them for some testing. One of the USRP2's worked perfectly when I connected it up to the host computer, but the other one is giving me issues. The uhd_find_devices is not able to detect this device. I tried debugging this issue by first swapping the SD card from the working USRP2 to the faulty one, with no success. I also tried reconfiguring the IP address with the command:
sudo ./usrp2_recovery.py --ifc=eth0 --new-ip=192.168.10.4 Both uhd_find_devices and uhd_usrp_probe --args "addr=192.168.10.4" still did not work. The LEDs on both USRP2's light up the same exact way. I have now run out of ideas of what to do. Does anybody else possibly have a solution to this problem? Thank you very much in advance, Rob -- View this message in context: http://gnuradio.4.n7.nabble.com/uhd-find-devices-not-detecting-USRP2-tp45284.html Sent from the GnuRadio mailing list archive at Nabble.com. _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio