Hi all,

Thanks! I'll give it a try once I get a LHCP antenna.

Best regards,
Cheng Chi


On Thu, Jan 30, 2014 at 6:58 AM, Vanush Vaswani <van...@gmail.com> wrote:

> The polarisation loss in your case might be 30 dB. Have a look into that.
>
> Regards,
> Vanush
>
> On Wed, Jan 29, 2014 at 7:45 PM, Sylvain Munaut <246...@gmail.com> wrote:
> > Hi,
> >
> >> I am trying to collect signal from Thuraya-3. Here is the setup I used:
> >> - USRP N210 + WBX
> >> - LNA with 30dB gain (ZHL-1217MLN)
> >> - Iridium Antenna (I don't have specific antenna for Thuraya right now.
> >> Since Iridium and Thuraya frequency bands are quite close, I suppose it
> >> would work more or less)
> >>
> >> Center frequency: 1530MHz
> >> Sampling rate: 10MHz
> >>
> >> From the spectrum (attached), I can see the Inmarsat signal, but no
> sign of
> >> Thuraya signal. Anyone has suggestion about how to receive the thuraya
> >> signal?
> >
> > Several issues to improve :
> >
> >  - Your antenna has the wrong polarization, this will definitely kill
> > your signals
> >  - You can also try more directional types of antenna like described
> > here : https://gmr.osmocom.org/trac/wiki/Receiver_Setup
> >  - Ideally if you have some GSM1800 nearby, it's good to have a filter
> > as those signals tend to swamp / saturate inputs when amplified ...
> >
> > fwiw, I have had some success receiving thuraya by using a GPS antenna
> > and just using a big metal surface as a reflector (to swap
> > polarization).
> >
> >
> > Cheers,
> >
> >    Sylvain
> >
> > _______________________________________________
> > Discuss-gnuradio mailing list
> > Discuss-gnuradio@gnu.org
> > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
> _______________________________________________
> Discuss-gnuradio mailing list
> Discuss-gnuradio@gnu.org
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

Reply via email to