Hi Baldo, There is also LibLTE - https://github.com/libLTE/libLTE It's a modular LTE library with minimal external dependencies. It's compatible with UHD devices and is LGPLv3. It's under development but currently provides eNodeB and UE implementations for most of the downlink. Among the example programs are downlink PSS and MIB scanners as well as an initial UE implementation which receives and demodulates the downlink broadcast channel (PBCH). The UE example has been tested with both test and live commercial eNodeBs. As it's a modular library, it doesn't depend on a specific framework like gnuradio but can be used easily in most SDR frameworks. We're currently porting the UE example to gnuradio and hope to make it available soon.
Regards, Paul On 15/05/14 10:35, Coll Perales, Baldomero wrote: > Thanks Marcus for your fast response. I’ll do it :). > > I'm adding this question again (sorry): Do you know any other project that is > developing LTE using gnu-radio/USRP? > > Regards, > Baldo > > De: Marcus Müller [mailto:marcus.muel...@ettus.com] > Enviado el: jueves, 15 de mayo de 2014 11:20 > Para: Coll Perales, Baldomero > Asunto: Re: [Discuss-gnuradio] LTE and USRP > > Hello Baldo, > UHD makes device access absolutely transparent -- so if you can use one USRP > for a purpose, you can also use another one, if it meets the specs. > As far as I can see, you can do downlink captures even with low-end non-UHD > devices like the rtl-sdr dongles, so this should be a breeze. From a spec > point of view, N200 is mainly inferior to B200 by means of maximum achievable > sampling rate, so as long as your f_sample stays low enough, everything > doable with an B200 should be doable with an N200, too. > However, since openLTE is but one of many applications of the USRP device > class, I think the right way to deal with that is writing an emai to the > openLTE mailing list :) > > Greetings, > Marcus > > On Thu, May 15, 2014 at 11:13 AM, Coll Perales, Baldomero <bc...@umh.es> > wrote: > Hello, > > I considering the possibility to purchase some USRP boards. My objective is > to work with open source code of LTE. I've seen the OpenLTE project > (http://openlte.sourceforge.net/, http://sourceforge.net/projects/openlte/) > which looks pretty nice. It seems that it works with USRP B2X0 (Bus Series). > Do you know if it is compatible with USRP networked series (USRP N200/N210)? > > Do you know any other project that is developing LTE using gnu-radio/USRP? > > Thanks in advance for your help, > Regards, > Baldo > > > > > > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > > > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > > -- > ________________________________________________________________ > Paul Sutton Ph.D. > > Software Radio Systems (SRS) > http://www.softwareradiosystems.com > > +353-87-9813473 | p...@softwareradiosystems.com > > PGP Key ID: 3B4A5292 > Fingerprint: B0AC 19C9 B228 A6EB 86E1 82B2 90C7 EC95 3B4A 5292 > ________________________________________________________________ _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
