On Sat, Aug 23, 2014 at 11:42 PM, Stephen Harrison <msteveharri...@gmail.com > wrote:
> Hi Sean, > > Is the Linaro distribution possible on MicroZed? I spent a long time > trying to get OpenEmbedded to happen with no success. The Linaro > distribution was a snap and I got GNURadio running no problem on the > ZedBoard. > > Stephen > For reference on getting OE working, see our Embedded page: http://gnuradio.org/redmine/projects/gnuradio/wiki/Embedded Though I can't speak directly to the MicroZed. Tom > On Sat, Aug 23, 2014 at 6:55 PM, West, Nathan <n...@ostatemail.okstate.edu > > wrote: > >> On Fri, Aug 22, 2014 at 7:10 PM, Nowlan, Sean >> <sean.now...@gtri.gatech.edu> wrote: >> > I'm not the world's foremost expert in OpenEmbedded (read: person with >> > nearly no knowledge of how to use it). I'd like to get GNU Radio >> working on >> > a MicroZed. Unfortunately that board is not among the boards supported >> as >> > mentioned here: http://gnuradio.org/redmine/projects/gnuradio/wiki/Zynq >> > Also, I don't necessarily need John Pendlum's changes to add userspace >> > support for interfacing with the FPGA. I just want to get the ARM >> running >> > GNU Radio. >> > >> > >> > The meta-xilinx-community repo claims to support a BSP and build for >> > MicroZed: >> > http://git.yoctoproject.org/cgit/cgit.cgi/meta-xilinx-community/about/ >> How >> > do I go about merging these two things together? I've taken my best >> guess as >> > to how to setup a configuration with Poky: >> > >> > >> > Build Configuration: >> > BB_VERSION = "1.23.1" >> > BUILD_SYS = "x86_64-linux" >> > NATIVELSBSTRING = "Ubuntu-13.10" >> > TARGET_SYS = "arm-poky-linux-gnueabi" >> > MACHINE = "microzed-zynq7" >> > DISTRO = "poky" >> > DISTRO_VERSION = "1.6+snapshot-20140822" >> > TUNE_FEATURES = " arm armv7a vfp neon zynq" >> > TARGET_FPU = "vfp-neon" >> > meta >> > meta-yocto >> > meta-yocto-bsp = "master:34436672f3ef4915e7526770a0fa8dcff328f93d" >> > meta-xilinx = "master:83bf54daeaca21879290bf444876f9949b117454" >> > meta-xilinx-community = >> "master:a093287b81d446435d44cf238a9240782a80e1b7" >> > meta-oe >> > meta-networking >> > meta-filesystems = "master:8f637f9bbcdda1dc7a1998d243708c727aa6016f" >> > meta-sdr = "master:21e2722a5e6671fd98268241f216e087f279566d" >> > >> > Am I on the right track here? It's still fetching/building/etc. I'm not >> too >> > confident it will actually work, since I don't really know what I'm >> doing. >> > >> > Thanks, >> > Sean >> > >> >> >> Hi Sean, >> >> The embedded page might be more useful: >> http://gnuradio.org/redmine/projects/gnuradio/wiki/embedded Especially >> check out the link to SDKs. There's a rootfs and modules built for a >> zedboard, all you'll need are device specific boot files. Just create >> the right partitions on your card and the provided rootfs and modules >> should be sufficient. (extract the rootfs to the / mounted partition >> on the SD card). Hopefully that can get you booting >> >> Nathan >> >
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
