The total gain setting range, and gain step size are set by the hardware. In most cases, the
step size is 0.5dB. On 2014-09-08 10:50, zealdeal wrote: > Hello everyone, > > Im trying to set the TX Gain of USRP device using the following command > while transmitting using uhd_siggen_gui tool: > > ./uhd_siggen_gui --sine -g <TX_Gain> -f 1013M --amplitude=1.0 -A TX/RX -v > > If I set the TX_Gain to non integer or non 0.5 fractional values, it is > getting set to nearest integer or 0.5 fractional values. > > For example, if I set TX_Gain to 22.6, it will be set to 22.5 as shown in > gui > Similary, setting TX_Gain to 22.1 will set it to 22, 19.9 will set it to > 19.5 etc > > But I can set the TX_Gain properly using the gui slider. > > Any idea on how to set it properly using command line? > > Thanks > > -- > View this message in context: > http://gnuradio.4.n7.nabble.com/TX-Gain-parameter-in-uhd-siggen-gui-tp50321.html > [1] > Sent from the GnuRadio mailing list archive at Nabble.com. > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio [2] Links: ------ [1] http://gnuradio.4.n7.nabble.com/TX-Gain-parameter-in-uhd-siggen-gui-tp50321.html [2] https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
