Thank you Jeff!
The ishort-to-complex block solve my problem

2014-09-29 23:59 GMT+03:00 Jeff Long <willco...@gmail.com>:

> You need an ishort-to-complex block after the file source. The file source
> does not convert for you. If that doesn't work and your data is definitely
> good (and not too short), then no idea.
>
> Please send replies to the list.
>
> - Jeff
>
>
> On 09/29/2014 04:53 PM, Θανάσης Μπαλαφούτης wrote:
>
>> The IQ.wav file is indeed 16-bit signed, 2 channels, but it has sample
>> rate=192000 (FCDpro+)
>> I want to get the Complex output (Audio output is always Float).
>> My setup is:   fileSource -----> Throttle ------>wx fft sink.
>>
>> Still get nothing
>>
>> Thanassis
>>
>>
>> 2014-09-29 23:31 GMT+03:00 Jeff Long <willco...@gmail.com
>> <mailto:willco...@gmail.com>>:
>>
>>     Make sure you have a throttle block between the source and the FFT,
>>     set to the rate at which you captured the wav. Also, there is a Wav
>>     File Source under Audio. The plain File Source will also work
>>     (usually WAV is 16-bit signed, 2 chan), but will have a little noise
>>     at the beginning (the wav header).
>>
>>     - Jeff
>>
>>
>>     On 09/29/2014 04:09 PM, Θανάσης Μπαλαφούτης wrote:
>>
>>         Hi,
>>         I have recorded with FCD pro+ and SRD# some IQ.wav files.
>>         When I try to import them in Gnu Radio companion as a "File
>>         source" and
>>         plot the frequency spectrum with the "FFt sink" I get nothing.
>>         Are the IQ.wav files produced by the SDR# recognizable from the
>>         Gnu radio?
>>
>>         Thanks!
>>
>>
>>         _________________________________________________
>>         Discuss-gnuradio mailing list
>>         Discuss-gnuradio@gnu.org <mailto:Discuss-gnuradio@gnu.org>
>>         https://lists.gnu.org/mailman/__listinfo/discuss-gnuradio
>>         <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio>
>>
>>
>>
>>     _________________________________________________
>>     Discuss-gnuradio mailing list
>>     Discuss-gnuradio@gnu.org <mailto:Discuss-gnuradio@gnu.org>
>>     https://lists.gnu.org/mailman/__listinfo/discuss-gnuradio
>>     <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio>
>>
>>
>>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> Discuss-gnuradio@gnu.org
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

Reply via email to