On 04.11.2014 09:43, Felix W. wrote: > Hi list, > > I have a strange problem with one of my custom blocks. It's a char stream > sink with a message output. It basically takes the input stream, selects a > few samples, packs them into blobs, makes a pmt::cons out of it and > publishes the message.
Your issue might be different, but I experienced problems with the block as well. Please see bug #751. --merlin http://gnuradio.org/redmine/issues/751 > My original QA flowgraph looked like this: > vector_source_b --> my_custom_block --> pdu_to_tagged_stream --> > vector_sink_b > > The flowgraph is run with tb.start(); time.sleep(2); tb.stop() > > In this setup, I constantly lose the last of the 3 published packets. I > made sure that the packets are actually published with a print statement > right after the call to message_port_pub(). > > During debugging, I attached a message_debug block to my_custom_block and > now all messages are received, even at the vector sink. There has been no > change to the custom block! I can reproduce the packet loss by commenting > out the message_debug block. > > Any ideas what is happening here? > > Felix > > > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio