Thanks very much Tom for your response. This issue is resolved after
replacing the graphic card driver installed by default with that provided
from the website of the card developer.
However, I am having two other issues now. One, in the terminal, I am
occasionally getting capital U's and L's when running GNU Radio with one Tx
and 4 Rx channels. Please note that I am using timed-commands to start both
the Tx and Rx's at the same time. When I check the system monitor while GNU
Radio is running (please see the attachment), the CPU history and RAM usage
seem to be fine. What causes this issue and how to handle it? Could it be
due to some instability in the writing speed to the hard drive?
BTW, I am having the same issue for my older PC (a PC with less specs). The
System Monitor tells me that my CPU usage is around 60% and my RAM usage is
around 25 %, however, I am getting U's and L's when I try to use four Rx
channels. Please note that the system doesn't throw lots of U's and L's at
once, it is a kind of frequent where bunch of them are thrown out every few
seconds or so.
Two, although on my older machine I am able to use the' virtual source' and
'virtual sink' blocks without any problems, when I try to use them on the
new PC, I get the following error:
Traceback (most recent call last):
File "./test_skh.py", line 595, in <module>
tb = test_skh()
File "./test_skh.py", line 486, in __init__
self.connect((self.virtual_source_0, 0),
(self.blocks_multiply_conjugate_cc_0, 0))
File "/usr/local/lib/python2.7/dist-packages/gnuradio/gr/hier_block2.py",
line 93, in __getattr__
return getattr(self._impl, name)
*AttributeError: 'top_block_sptr' object has no attribute
'virtual_source_0'*
Things work fine if I replace the virtual blocks with direct connections. I
am not sure why?
Thanks in advance for your help.
Best regards,
Khalid
On Mon, Jan 5, 2015 at 12:11 PM, Tom Rondeau <t...@trondeau.com> wrote:
> On Wed, Dec 31, 2014 at 11:17 AM, khalid.el-darymli <
> khalid.el-dary...@mun.ca> wrote:
>
>> Hi,
>>
>> We recently bought a new machine with like 4 GHz processor, 16 GB of RAM.
>> For the graphic card, we use the Radeon R7 250 1000 MHz GDDR5.
>>
>> Latest version of Ubuntu (14.04 LTS) was installed along with GNU Radio
>> built from the source. Everything seems to be installed just fine. However,
>> when trying to use GNU Radio Companion (GRC), the GUI's are so slow. Every
>> time I try to place in or move the blocks in GRC, the whole GUI stuck for a
>> while and it gets so slow. Because of this, I am not able to run GRC.
>>
>>
>> Prior to this, GRC used to work just fine on another machine with a much
>> lower specs for the RAM and the processor but with RS880 [Radeon HD 4200]
>> graphic card.
>>
>>
>> What is the cause for this problem and how to fix it? Could it be the new
>> graphic card (Radeon R7 250 GDDR5)?
>>
>> Thank you.
>>
>> Best regards,
>> Khalid
>>
>
> Sorry, this sounds like a computer/os/configuration problem on your end.
> There were some slowdown issues with GRC that were patched a while ago, so
> if you've built from the latest source, things shouldn't be that bad.
>
> Tom
>
>
>
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
