On Fri, Mar 13, 2015 at 7:40 PM, Alireza Khodamoradi <
ar.khodamor...@gmail.com> wrote:

> Hi Tom,
>
> I connected my UART to /dev/ttyACM0. Here are the result:
>
> -With the image from Xillybus:
>
> I see the boot sequence and it works fine.
>
> -With the image from
> http://gnuradio.org/redmine/projects/gnuradio/wiki/Zynq
>
> I get nothing!
>
> Am I overlooking something very obvious?
>
> v/r
> Alireza
>

That Zynq page probably needs some updating.

But otherwise, try Philip's suggestion in his response to you. A few of us
have tested it and can confirm it boots fine.

Tom



> On Fri, Mar 13, 2015 at 11:06 AM, Tom Rondeau <t...@trondeau.com> wrote:
>
>> On Fri, Mar 13, 2015 at 1:17 PM, Alireza Khodamoradi <
>> alire...@eng.ucsd.edu> wrote:
>>
>>> Hello everyone,
>>>
>>> I'm going through the instructions from here:
>>>
>>> http://gnuradio.org/redmine/projects/gnuradio/wiki/Zynq
>>>
>>> to get a working image with gnu radio for my zedboard.
>>>
>>> Unfortunately I can't get the board to boot with this image. I was
>>> wondering if someone can help me.
>>>
>>> what I tried so far ( all failed - can't boot from the SDCard):
>>>
>>> - default settings in the instructions
>>> - renaming u-boot.bin to boot.bin
>>> - renaming u-boot.bin to BOOT.BIN
>>> - renaming uImage--zedboard-zynq7.dtb to devicetree.dtb
>>> - I tried command line as well as gparted gui.
>>>
>>> what I checked:
>>>
>>> - download a linux from XillyBus and boot the board with SDCard -> works
>>>
>>> v/r
>>> Alireza
>>>
>>
>> Can you provide details about how it's not booting? Are you monitoring
>> the boot sequence over the tty connection (/dev/ttyACM0, usually). I've
>> noticed bugs on my system where the u-boot sequence doesn't kick off
>> properly, so I have to go in over the serial connection to actually call
>> 'boot' to get it to run. (I'm sure this problem is something that I've done
>> to myself.)
>>
>> Tom
>>
>>
>
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

Reply via email to