Hello, you can use:
https://github.com/MLAB-project/satellite-observer/tree/master/gr-sat_observer This is a GNURAdio block to decode NOAA analog signal. It uses: http://atpdec.sourceforge.net/ 2015-10-23 10:29 GMT+02:00 Volker Schroer <dl1...@gmx.de>: > If you want to decode the apt pictures, you can do this by the means of > gnuradio. > > I use a fcdpro+ but it should be possible to use an dongle , too. > > To display the decoded image I use > https://github.com/dl1ksv/gr-display > > -- Volker > > Am 23.10.2015 um 09:03 schrieb alfred noble: > >> Hi everyone I have RTL2832u and recently I've decoded the data from >> NOAA satellite successfully , but I used two windows apps , one SDR# >> and the other WXtoImg , now I want to write an app myself that >> decodes the data received from the NOAA satellite.I want to know if >> any one here has done this before and give me some pieces of advise. >> Is it possible to write a program based on C# to receive and decode >> the data from NOAA satellite ? >> >> best regards Alfred >> >> >> _______________________________________________ Discuss-gnuradio >> mailing list Discuss-gnuradio@gnu.org >> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >> >> > > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
