Hi Marcus, a) Yes b) Yes (i don't know how the preamble or synword or data my bell push are looking that is what i want know too) here is a protocol of it: http://www2.produktinfo.conrad.com/datenblaetter/600000-624999/620338-an-01-de-KLINGELTASTER_FS20_TK.pdf
C) with a scope and with Baudline after the "complex to mag block" i can detect the (0's and 1's) transferm like low and high. it is three burst i zoomed so that you can see nearly the bit transfer. <http://gnuradio.4.n7.nabble.com/file/n57248/testtt.png> <http://gnuradio.4.n7.nabble.com/file/n57248/Klingeltasterplot.png> when the scope sink is after the MM clock recovery i can also see the transfern von low and high with Baudline too.But the transfer is slow i think because the data_rate (19200) reduce the speed in the MM clock recovery. But the Transfer is looking gut with baudline. <http://gnuradio.4.n7.nabble.com/file/n57248/clock_recovery_MM.png> <http://gnuradio.4.n7.nabble.com/file/n57248/variable.png> <http://gnuradio.4.n7.nabble.com/file/n57248/baudline_2.png> but i cannt zoom in i can only zoom out and it see like. <http://gnuradio.4.n7.nabble.com/file/n57248/baudline3.png> but when the scope sink is after the binary slicer i see nothing with Baudline just <http://gnuradio.4.n7.nabble.com/file/n57248/baudline_after_binary.png> and i cannot conect the Binary slicer output with a scope sink. Best regards Rebecca -- View this message in context: http://gnuradio.4.n7.nabble.com/Baudline-sink-ist-missing-tp57170p57248.html Sent from the GnuRadio mailing list archive at Nabble.com. _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio