On the release 4 image, you can't set the clock speed under 10 MHz. However, you can use a DDC (which is built in and automatically used). Simply set the clock rate to 32 MHz (or 16 MHz if this is MIMO) and the sample rate to 8 MHz.
Cheers, Martin On 03/30/2016 05:02 PM, Gabriel Pechiarovich wrote: > Hi all, > I've developed a flowgraph wich includes a qpsk modulator and and audio > encoder, I used to run it in the E310 using the first release > (http://files.ettus.com/e3xx_images/e3xx-release-001/) and now trying to > use the release 4. > > The problem is: > in the UHD sink and source the clock rate was set to 8e6 Hz, and it > worked fine, in the release 1, but in the relese 4 the Clock rate wont > go lower than 10e6 Hz, so i cant archive the same results. > > Any idea how to force the use of 8MHz as the clock rate using the release4 > > Thank you very much > Gabriel Pechiarovich Salas > > > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio