Hello Rahul, Thank you for working through the setup with me. The XCVR2450 daughterboard can only tune as low as 2.4GHz so is unable to receive broadcast FM, which would use the Wide Band FM Receive block, at 98 MHz. You can try observing WiFi signals at 2.437 MHz as a pretty reliable test signal. You should also check what antenna you have connected and make sure it is appropriate for the frequencies you wish to receive.
Regards, Derek On Tue, Jun 7, 2016 at 3:01 PM, Rahul Pal Singh <rahulpal.si...@iitrpr.ac.in > wrote: > Block Diagram image is ATTACHED. > > > > > But I am actually not confident whether the device is transmitting the > desired input and then receiving it as it is. What i want to tell i have > used GNU Radio Companion for constructing the FM receiver but shows > following error: > Loading: "/home/rahul/fm_rx.grc" > >>> Done > > Showing: "/home/rahul/fm_rx.grc" > > Generating: '/home/rahul/fm_rx.py' > > Generating: '/home/rahul/fm_rx.py' > > Executing: /usr/bin/python -u /home/rahul/fm_rx.py > > linux; GNU C++ version 5.3.1 20160413; Boost_105800; > UHD_003.009.004-0-g2b5a88bb > > Using Volk machine: avx2_64_mmx_orc > -- Opening a USRP2/N-Series device... > -- Current recv frame size: 1472 bytes > -- Current send frame size: 1472 bytes > > UHD Warning: > Unable to set the thread priority. Performance may be negatively > affected. > Please see the general application notes in the manual for > instructions. > EnvironmentError: OSError: error in pthread_setschedparam > gr::log :INFO: audio source - Audio sink arch: alsa > len(audio_taps) = 925 > aU > > > i WANT TO KNOW WHY I AM LISTNING ANYTHING MUSIC AS IN THE FM RADIO. iS > THERE ANY ISSUE WITH THE SOFTWARE OR DRIVERS INSTALLED OR THERE IS > PROGRAMMING ERROR > > From: > Rahul > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > >
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio