Imre,
With the exception of the swig files, the paths things are being installed
to look logical to me for the way the windows install is built. Seems like
the swig files should be in include/pager2/swig based on how the tree is
set up for the built-in blocks, though I can't say for certain. I assume,
though, that you have tried moving those files to /include/pager2/swig
instead?
Past that, this error message is a problem that's been encountered before
and so I would take a look at the other solutions and see what might be
applicable. Can we get the whole traceback?
Also, since you've modified pager, I would start by comparing pager2 to
pager from a declarations points of view and see what's different, and also
try interacting directly with your module in Python (from the run_gr prompt
of course). Hopefully that will help narrow down what's not working.
Geof
On Sun, Oct 23, 2016 at 3:01 PM, Imre Biacsics <techn...@livep2000.nl>
wrote:
> Thanks again Geof, your hints realy helped me.
>
> After some bumps in the table (From my head), and quite some hair laying
> around (Also from my head);
>
> Cmake, configure, build and even install / uninstall ends with zero
> warnings & errors.
> I'll send you a .zip file by direct mail. (Be aware, it's a mess)
>
> The blocks are visible in GRC, but it still throws the: 'module' object
> has no attribute <blockname>
> Snipping out the docs entries, installing does this: (something wierd
> happens in the middle)
>
> 1> -- Installing: C:/Program Files/GNURadio-3.7/lib/cmake/
> pager2/pager2Config.cmake
> 1> -- Installing: C:/Program Files/GNURadio-3.7/include/pager2/api.h
> 1> -- Installing: C:/Program Files/GNURadio-3.7/include/
> pager2/flex_frame.h
> 1> -- Installing: C:/Program Files/GNURadio-3.7/include/pager2/slicer_fb.h
> 1> -- Installing: C:/Program Files/GNURadio-3.7/include/
> pager2/flex_deinterleave.h
> 1> -- Installing: C:/Program Files/GNURadio-3.7/include/
> pager2/flex_parse.h
> 1> -- Installing: C:/Program Files/GNURadio-3.7/include/pager2/flex_sync.h
> 1> -- Installing: C:/Program Files/GNURadio-3.7/lib/gnuradio-pager2.lib
> 1> -- Installing: C:/Program Files/GNURadio-3.7/bin/gnuradio-pager2.dll
> 1> -- Installing: C:/Program Files/GNURadio-3.7/Lib/site-
> packages/pager2/_pager2_swig.pyd
> 1> -- Installing: C:/Program Files/GNURadio-3.7/Lib/site-
> packages/pager2/pager2_swig.py
> 1> -- Installing: C:/Program Files/GNURadio-3.7/Lib/site-
> packages/pager2/pager2_swig.pyc
> 1> -- Installing: C:/Program Files/GNURadio-3.7/Lib/site-
> packages/pager2/pager2_swig.pyo
>
> -------------------- (Uh, /pager/pager/... ???)
>
>
> *1> -- Installing: C:/Program
> Files/GNURadio-3.7/include/pager2/pager2/swig/pager2_swig.i1> --
> Installing: C:/Program
> Files/GNURadio-3.7/include/pager2/pager2/swig/pager2_swig_doc.i*
>
> 1> -- Installing: C:/Program Files/GNURadio-3.7/Lib/site-
> packages/pager2/__init__.py
> 1> -- Installing: C:/Program Files/GNURadio-3.7/Lib/site-
> packages/pager2/__init__.pyc
> 1> -- Installing: C:/Program Files/GNURadio-3.7/Lib/site-
> packages/pager2/__init__.pyo
> 1> -- Installing: C:/Program Files/GNURadio-3.7/share/
> gnuradio/grc/blocks/pager2_flex_deinterleave.xml
> 1> -- Installing: C:/Program Files/GNURadio-3.7/share/
> gnuradio/grc/blocks/pager2_flex_sync.xml
> 1> -- Installing: C:/Program Files/GNURadio-3.7/share/
> gnuradio/grc/blocks/pager2_slicer_fb.xml
>
> Hmmm, got the feeling i'm so close.
>
> Imre Biacsics
>
>
>
> Thank you, -o- wise one.
>
> In fact that was de only problem: Now i can build all projects and even
> build install.
> But the module was not properly installed and threw the: AttributeError:
> 'module' object has no attributeIn the GRC terminal.
>
> I narrowed that down to the file /swig/pager2_swig.i (Forgot to use the
> gr_modtool add command)
> After properly adding the block it looks like this:
>
>
> /* -*- c++ -*- */
>
> #define PAGER2_API
>
> %include "gnuradio.i" // the common stuff
>
> //load generated python docstrings
> %include "pager2_swig_doc.i"
>
> %{
> #include "pager2/flex_deinterleave.h"
> %}
>
> %include "pager2/flex_deinterleave.h"
> GR_SWIG_BLOCK_MAGIC2(pager2, flex_deinterleave);
> Wich created new issues i do not understand:
>
> Severity Code Description Project File Line Suppression State
> Error LNK2019 unresolved external symbol "__declspec(dllimport) void
> __cdecl pmt::intrusive_ptr_release(class pmt::pmt_base *)"
> (__imp_?intrusive_ptr_release@pmt@@YAXPEAVpmt_base@1@@Z) referenced in
> function "public: __cdecl boost::intrusive_ptr<class
> pmt::pmt_base>::~intrusive_ptr<class pmt::pmt_base>(void)"
> (??1?$intrusive_ptr@Vpmt_base@pmt@@@boost@@QEAA@XZ) _pager2_swig
> F:\grc\OOTmodules\gr-pager2\build\swig\pager2_swigPYTHON_wrap.obj 1
>
> After commenting out like this:
>
> %{
> /* #include "pager2/flex_deinterleave.h" */
> %}
>
> /*
> %include "pager2/flex_deinterleave.h"
> GR_SWIG_BLOCK_MAGIC2(pager2, flex_deinterleave);
> */
>
> It builds again, what am i missing....
>
> Imre Biacsics
>
>
>
>
>
>
> On Sat, 22 Oct 2016 03:54:38 +0200, Geof Nieboer <gnieb...@corpcomm.net>
> wrote:
>
> Look in the cmake file(s) for something along the lines of:
> COMMAND ""
>
> If you find it, delete the double quotes. I searched and found one in
> cmake\Modules\UseSWIG.cmake, so I would start there.
>
> Geof
>
> On Fri, Oct 21, 2016 at 9:20 PM, Imre Biacsics <techn...@livep2000.nl>
> wrote:
>
>> Dear specialists,
>>
>> One step solved, creating two other issues. I'am sure: overlooking
>> something very obvious. Sorry for that.
>> The two projects throw a "Error MSB6006 "cmd.exe" exited with code 9009."
>>
>> Wich makes sense becease:
>>
>> '""' is not recognized as an internal or external command, operable
>> program or batch file.
>>
>> I hope someone can shine a light on this. Thanks in advance.
>>
>> Imre Biacsics
>>
>> Partial build output:
>>
>> 7>Target "CustomBuild" in file "C:\Program Files
>> (x86)\MSBuild\Microsoft.Cpp\v4.0\V140\Microsoft.CppCommon.targets" from
>> project "F:\grc\OOTmodules\gr-pager2\build\swig\_pager2_swig.vcxproj"
>> (target "_BuildGenerateSourcesAction" depends on it):
>> 7> Using "CustomBuild" task from assembly "C:\Program Files
>> (x86)\MSBuild\Microsoft.Cpp\v4.0\V140\Microsoft.Build.
>> CppTasks.Common.dll".
>> 7> Task "CustomBuild"
>> 7> Forcing rebuild of all source files due to missing command TLog
>> "F:\grc\OOTmodules\gr-pager2\build\swig\_pager2_swig.dir\
>> Debug\_pager2_swig.tlog\custombuild.command.1.tlog".
>> 7> setlocal
>> 7> "C:\Program Files (x86)\cmake\bin\cmake.exe"
>> -HF:/grc/OOTmodules/gr-pager2 -BF:/grc/OOTmodules/gr-pager2/build
>> --check-stamp-file F:\grc\OOTmodules\gr-pager2\build\swig\CMakeFiles\
>> generate.stamp
>> 7> if %errorlevel% neq 0 goto :cmEnd
>> 7> :cmEnd
>> 7> endlocal & call :cmErrorLevel %errorlevel% & goto :cmDone
>> 7> :cmErrorLevel
>> 7> exit /b %1
>> 7> :cmDone
>> 7> if %errorlevel% neq 0 goto :VCEnd
>> 7> setlocal
>> 7> ""
>> 7> if %errorlevel% neq 0 goto :cmEnd
>> 7> :cmEnd
>> 7> endlocal & call :cmErrorLevel %errorlevel% & goto :cmDone
>> 7> :cmErrorLevel
>> 7> exit /b %1
>> 7> :cmDone
>> 7> if %errorlevel% neq 0 goto :VCEnd
>> 7> setlocal
>> 7> ""
>> 7> if %errorlevel% neq 0 goto :cmEnd
>> 7> :cmEnd
>> 7> endlocal & call :cmErrorLevel %errorlevel% & goto :cmDone
>> 7> :cmErrorLevel
>> 7> exit /b %1
>> 7> :cmDone
>> 7> if %errorlevel% neq 0 goto :VCEnd
>> 7> Building Custom Rule F:/grc/OOTmodules/gr-pager2/swig/CMakeLists.txt
>> 7> CMake does not need to re-run because F:\grc\OOTmodules\gr-pager2\
>> build\swig\CMakeFiles\generate.stamp is up-to-date.
>> 7> '""' is not recognized as an internal or external command,
>> 7> operable program or batch file.
>> 7> 1>
>> 7>C:\Program Files (x86)\MSBuild\Microsoft.Cpp\
>> v4.0\V140\Microsoft.CppCommon.targets(171,5): error MSB6006: "cmd.exe"
>> exited with code 9009.
>> 7> Done executing task "CustomBuild" -- FAILED.
>> 7> 1>
>> 7>Done building target "CustomBuild" in project "_pager2_swig.vcxproj" --
>> FAILED.
>> 7>
>> 7>Build FAILED.
>> 7>
>> 7>Time Elapsed 00:00:00.11
>> ========== Rebuild All: 6 succeeded, 1 failed, 0 skipped ==========
>>
>>
>>
>>
>>
>> On Wed, 19 Oct 2016 14:09:10 +0200, Geof Nieboer <gnieb...@corpcomm.net>
>> wrote:
>>
>> Imre,
>>
>> Glad you had success. I'll work to replicate your steps, and then
>> towards building a "developer pack" as an add-on to the basic install (to
>> include adding all the many symbol files for debugging purposes).
>>
>> Geof
>>
>> On Wed, Oct 19, 2016 at 3:45 AM, Imre Biacsics <techn...@livep2000.nl>
>> wrote:
>>
>>> I am going to answer my own question.
>>>
>>> "How simple is the solution when the cause is known"
>>>
>>> I was a bit dumb:
>>>
>>> Somewhere in the scripts, spaces are removed. The result was that is
>>> looked for:
>>>
>>> F:/grc/OOTmodules/
>>>
>>> My real path :
>>>
>>> F:/grc/OOT modules/
>>>
>>> :( sorry
>>>
>>> Imre Biacsics
>>>
>>>
>>> (Swigwin issue)
>>>>
>>>> Following up this message
>>>> https://lists.gnu.org/archive/html/discuss-gnuradio/2016-07/
>>>> msg00108.html
>>>> With another question.
>>>>
>>>> My goal was to sort out all the dependecies and paths to succesfully
>>>> automate the process.
>>>> When done I will share my findings.
>>>>
>>>> In short, I did this:
>>>>
>>>> - Installed Geof's win64 by msi, Cmake 3.3, VS2015 (community edition).
>>>> - Copied the dependecies from Geof's 'GNURadio_Windows_Build_Scripts'
>>>> after running it once: CppUnit, Boost, Swig, pkg-config.
>>>> - Used Gavin's tips to automate the gr-modtool New & Add functionality.
>>>> - Created a new terminal link, called: "Gnuradio modtool prompt",
>>>> implementing:
>>>>
>>>> * The orginal "Gnuradio command prompt"
>>>> * The the "vs 2015 win64 prompt".
>>>> * Added path's for the dependecies statically. (For better control).
>>>>
>>>> - Created .bat files for cmake & build.
>>>>
>>>> (As example project I converted the gr-pager modules to OOT code)
>>>>
>>>> Roadmap:
>>>>
>>>> 1. Create OOT (MT_New.bat)
>>>> 2. Add module 'pager2' (MT_Add.bat)
>>>> 3. Insert converted pager code.
>>>> 4. Cmake (CCmake.bat)
>>>> 5. Build (Build.bat)
>>>>
>>>> For readabillity i won't post the complete output, but step 4 gives me
>>>> some warnings (4x) i don't understand (Maybe linked to the error in step
>>>> 5):
>>>>
>>>> CMake Warning (dev) at cmake/Modules/UseSWIG.cmake:300
>>>> (target_link_libraries):
>>>> Link library type specifier "optimized" is followed by specifier
>>>> "debug"
>>>> instead of a library name. The first specifier will be ignored.
>>>> Call Stack (most recent call first):
>>>> cmake/Modules/GrSwig.cmake:174 (SWIG_LINK_LIBRARIES)
>>>> swig/CMakeLists.txt:50 (GR_SWIG_MAKE)
>>>> This warning is for project developers. Use -Wno-dev to suppress it.
>>>>
>>>> But the result:
>>>>
>>>> -- Configuring done
>>>> -- Generating done
>>>> -- Build files have been written to: F:/grc/OOT modules/gr-pager2/build
>>>>
>>>> Step 5 produces 1 error:
>>>>
>>>> (SNIP!)
>>>>
>>>> building ZERO_CHECK => Succes
>>>> building gnuradio-pager2 => Succes!!!
>>>>
>>>> building pager2_swig_swig_2d0df,
>>>> is building _pager2_swig_swig_tag,
>>>> is building pager2_swig_swig_doc,
>>>> is building _pager2_swig_doc_tag => Succes
>>>>
>>>> Then:
>>>>
>>>> CUSTOMBUILD : error : tag OUTPUT_DIRECTORY: Output directory
>>>> `F:/grc/OOTmodules/gr-pager2/build/swig/pager2_swig_doc_swig_docs'
>>>> does not exist and cannot be created [F:\grc\OOT
>>>> modules\gr-pager2\build\swig\pager2_swig_swig_doc.vcxproj]
>>>>
>>>> That folder exists and is readable/writable (It holds a doxygen file
>>>> and a
>>>> /xml subfolder), but following the naming conventions (These folders
>>>> names
>>>> reflects the project names), something is wrong: there is no project
>>>> named
>>>> 'pager2_swig_doc_swig_docs'.
>>>>
>>>> Do not know how to fix this, but think it should be :
>>>> "_pager2_swig_swig_doc"
>>>>
>>>> ----------------------
>>>> Okay.... so.... ignored it and inserted the .dll, .lib, block xml in
>>>> GRC,
>>>> almost worked!
>>>> Blocks are visible and insertable, but starting the flowgraph is throws:
>>>>
>>>> 'module' object has no attribute <blockname>
>>>>
>>>> Googling on that it's told "Your modules is not propery swigged", that
>>>> makes sense, given the errors.
>>>>
>>>> ----------------------
>>>>
>>>> Someone got clue to overcome this bump?
>>>>
>>>> Thanks in Advance,
>>>>
>>>> Imre Biacsics
>>>>
>>>
>>> _______________________________________________
>>> Discuss-gnuradio mailing list
>>> Discuss-gnuradio@gnu.org
>>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>>>
>>>
>>
>>
>>
>> --
>> Using Opera's mail client: http://www.opera.com/mail/
>>
>
>
>
>
> --
> Using Opera's mail client: http://www.opera.com/mail/
>
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
