I also would like to report that a nice 440KHz cosine can be heard perfectly OK with the default audio sink.
So now I have my doubts about the wav file source block instead of the audio sink block.... Any ideas? thanks Achilleas On Mon, Nov 7, 2016 at 10:20 AM, Achilleas Anastasopoulos <anas...@umich.edu > wrote: > Hi Geof, > > thank you for your suggestions. > > > Here is some more information from my Windows 7 running gnuradio binaries > 3.7.10.1 > > 1) > When I use a simple wav file source with audio sink and without setting > the "Device Name" entry I get the following output: > > INFO: Audio sink arch: windows > gr::pagesize: no info; setting pagesize = 4096 > aOaOaOaOaOaOaOaOaOaOaOaOaOaOaOaOaOaOaOaOaOaOaOaOaOaOaOaOaOaOaOaOaOaO > > I can hear the sound but it is not coming out at the right speed/etc > regardless of what sample rate I choose. > > So I tried the second method that Geof suggested: entering explicitly the > device ID and/or the string representing the device's name. > > 2) > Following Geof's advice I went to the "Device Manager" and the "Sounds, > video and game controllers" section and I see a device "High Definition > Audio Device". I clink on the "Details" tab and under the Property "device > description" i see "High Definition Audio Device", so this is what I put as > the string under the "Device Name" property of the audio sink. > > The output then is: > > INFO: Audio sink arch: windows > INFO: Warning: waveOut device 'High Definition Audio Device' was not > found, defaulting to WAVE_MAPPER > gr::pagesize: no info; setting pagesize = 4096 > aOaOaOaOaOaOaOaOaOaOaOaOaOaOaOaOaOaOaOaOaOaOaOaOaOaOaOaOaOaO > aOaOaOaOaOaOaOaOaOa > aOaOaOaOaOaOaOaOaOaO > > And the sound is the same as above. > > So my question is the following: > > How exactly can I find in the control panel the name of my audio device? > Clearly the one I used ("High Definition Audio Device") was not found... > > Can it be that the problem is with the "wav file source" block and not > with the audio sink block? > > Thanks > Achilleas > > > On Sun, Nov 6, 2016 at 5:12 PM, Geof Nieboer <gnieb...@corpcomm.net> > wrote: > >> The audio device in the windows audio sink can be used one of two ways, >> >> First is to use a number which is the device ID of the audio device, the >> second is to enter a string representing the device's name. >> >> Realize, however, that there is no way to interactively iterate through >> the list of available devices, so you'll have to figure out the ID's/names >> yourself through the control panel. It will give a warning in the output >> log if what you entered is not found so you can least use trial and error. >> If it can't find the device you entered, or you don't put an entry in, it >> will use the WAVE_MAPPER device. >> >> Geof >> >> >> On Sun, Nov 6, 2016 at 5:15 AM, Tarquin Roode <tarquin.ro...@gmail.com> >> wrote: >> >>> Hi >>> >>> >>> >>> Mine works, I am using 3.7.9.2 >>> >>> So not a problem with the inary, it worked on Both Win 7 and Win 10 >>> >>> >>> >>> I am not a home a he moment so don’t have ss to my PC, bt I just >>> plopped the Audio Sink down and it worked >>> >>> >>> >>> Ood luck >>> >>> arqun >>> >>> >>> >>> *From:* Discuss-gnuradio [mailto:discuss-gnuradio-bounces+tarquin.roode= >>> gmail....@gnu.org] *On Behalf Of *Achilleas Anastasopoulos >>> *Sent:* Saturday, 05 November 2016 2:46 AM >>> *To:* Discuss-gnuradio@gnu.org >>> *Subject:* [Discuss-gnuradio] problems with windows binaries and audio >>> >>> >>> >>> Hi, >>> >>> >>> >>> I have installed the windows binaries from GCNDevelopment >>> >>> http://www.gcndevelopment.com/gnuradio/ >>> >>> >>> >>> A simple test with a wav file and an audio sink does not seem to work. >>> >>> I have changed the config file to use audio - windows but still this is >>> not working. >>> >>> (same grc file works fine on Linux). >>> >>> I have tried this on both Windows 7 and 10 with no success. >>> >>> >>> >>> Can someone report if they had success with audio on Windows with these >>> binaries? >>> >>> >>> >>> Any ideas as to what else I can try? >>> >>> >>> >>> thanks >>> >>> Achilleas >>> >>> _______________________________________________ >>> Discuss-gnuradio mailing list >>> Discuss-gnuradio@gnu.org >>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >>> >>> >> >
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio