On 12/13/2016 02:53 PM, Qurat-Ul-Ann Akbar wrote:
Hi,
Can you kindly tell me how to do that? Because I am using GNU Radio
with the USRP N210 and the uhd sink block basically consists of the
parameters for configuring the USRP device. How can I do that during
simulation?
Thanks!
This is a good question for the discuss-gnuradio mailing list, to which
I have cross-posted, and the conversation can continue on there.
Any of the parameters in a block can be tied to a variable in GRC, and
many of the parameters are also programmable using the
message port on the UHD sink block.
The details of "how do I make my software do that" requires more input
about what your software is supposed to do, what your
level of programming experience is, etc.
On Tue, Dec 13, 2016 at 11:56 AM, <mle...@ripnet.com
<mailto:mle...@ripnet.com>> wrote:
Yes, TX gain, frequency, etc, are all changeable at runtime--they
aren't just "setup only" parameters.
On 2016-12-13 12:11, Qurat-Ul-Ann Akbar via USRP-users wrote:
Hi,
Is it possible to change the transmitted power just before the
signal is about to be transmitted during a simulation sending
some data. I know that you can configure TX Gain but can you keep
changing it?
For example the first 100 packets for a certain amount of time
have this much power and the next 100 have a different value of
power. Is this possible with USRP N210 ?
Best,
Annie
_______________________________________________
USRP-users mailing list
usrp-us...@lists.ettus.com <mailto:usrp-us...@lists.ettus.com>
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
<http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com>
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio