Wao superb! you cleaned it out also. Yes it works. Thanks much. But did you figure out what was the issue at the first place :)
I have another related question about the wireshark connector in transceiver_OQPSK.grc. I see that wireshark connector gets input from two different outputs. One from pdu_out of IEEE802.15.4 MAC and another from rxout of IEEE802.15.4 OQPSK PHY When I see the output pcap file i..e sensor.pcap, same packet is logged twice. I realized this by observing their sequence number field, which repeats two times for every broadcast frame. I have attached the pcap file for your reference. sensor.pcap <http://gnuradio.4.n7.nabble.com/file/n64517/sensor.pcap> I solved the issue by disconnecting one of the connectors but I am not sure which one is correct. pdu_out of IEEE802.15.4 MAC should go to wireshark or rxout of IEEE802.15.4 OQPSK PHY should go to wireshark Both of the above dump correct wireshark capture. Regards Sumit -- View this message in context: http://gnuradio.4.n7.nabble.com/Running-gr-ieee-802-11-and-gr-ieee-802-15-4-under-same-flowgraph-interference-and-co-existence-tp64474p64517.html Sent from the GnuRadio mailing list archive at Nabble.com. _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
