On 02/09/2018 01:26 PM, Müller, Marcus (CEL) wrote: > To be a bit more explicit: like the product page says, you **cannot** > use the UBX-160 in an N210. You need an X3x0 if you want to use that!
Well, you can, but it's not alias-free. -- M > > If you're however interested in smaller bandwidths that the N210 can > sample alias-free, yes, the UBX-40, or the other *BX daughterboards > would be an appropriate choice! > On Fri, 2018-02-09 at 15:48 -0500, Marcus D. Leech wrote: >> On 02/09/2018 03:44 PM, Tellrell White wrote: >>> Hello >>> I'm currently using the N210 with the UBX-160 daughterboard and the >>> link below says the analog bandwidth is 160 MHZ. So, I'm assuming >>> this BW isn't changeable so what do I put for the channel BW within >>> the UHD block within GNU Radio? >>> >>> https://kb.ettus.com/About_USRP_Bandwidths_and_Sampling_Rates >>> >>> Tellrell White >>> >>> >>> _______________________________________________ >>> Discuss-gnuradio mailing list >>> Discuss-gnuradio@gnu.org >>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >> The analog bandwidth on that card is fixed, so the bandwidth setting >> will have no effect. The UBX-40 would have been a better choice, >> given the >> 100Msps ADC rate on the N210. >> >> >> _______________________________________________ >> Discuss-gnuradio mailing list >> Discuss-gnuradio@gnu.org >> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
