Hi,
*Qn-1 When I execute the following : **
*
*pybombs prefix init !/tique_radio -a demo -R gnuradio-default*
*After 87% of the compilation, I get this error : *
[ 87%] Building CXX object
gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.
cxx.o
/home/tique/tique_radio/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:
In function ‘PyObject* _wrap_time_spec_t_get_system_time(PyObject*,
PyObject*)’:
/home/tique/tique_radio/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:19511:16:
error: ‘get_system_time’ is not a member of ‘uhd::time_spec_t’
result = uhd::time_spec_t::get_system_time();
^
/home/tique/tique_radio/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:
In function ‘PyObject* _wrap_dboard_iface_set_gpio_debug(PyObject*,
PyObject*, PyObject*)’:
/home/tique/tique_radio/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:27597:15:
error: ‘class uhd::usrp::dboard_iface’ has no member named ‘set_gpio_debug’
(arg1)->set_gpio_debug(arg2,arg3);
^
/home/tique/tique_radio/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:
In function ‘PyObject* _wrap_dboard_iface_sptr_set_gpio_debug(PyObject*,
PyObject*, PyObject*)’:
/home/tique/tique_radio/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:28960:16:
error: ‘class uhd::usrp::dboard_iface’ has no member named ‘set_gpio_debug’
(*arg1)->set_gpio_debug(arg2,arg3);
^
/home/tique/tique_radio/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:
In function ‘void init_uhd_swig()’:
/home/tique/tique_radio/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:48264:91:
error: ‘ATR_REG_IDLE’ is not a member of ‘uhd::usrp::dboard_iface’
SWIG_Python_SetConstant(d,
"dboard_iface_ATR_REG_IDLE",SWIG_From_int(static_cast< int
>(uhd::usrp::dboard_iface::A
^
/home/tique/tique_radio/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:48265:94:
error: ‘ATR_REG_TX_ONLY’ is not a member of ‘uhd::usrp::dboard_iface’
SWIG_Python_SetConstant(d,
"dboard_iface_ATR_REG_TX_ONLY",SWIG_From_int(static_cast< int
>(uhd::usrp::dboard_iface
^
/home/tique/tique_radio/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:48266:94:
error: ‘ATR_REG_RX_ONLY’ is not a member of ‘uhd::usrp::dboard_iface’
SWIG_Python_SetConstant(d,
"dboard_iface_ATR_REG_RX_ONLY",SWIG_From_int(static_cast< int
>(uhd::usrp::dboard_iface
^
/home/tique/tique_radio/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:48267:98:
error: ‘ATR_REG_FULL_DUPLEX’ is not a member of ‘uhd::usrp::dboard_iface’
SWIG_Python_SetConstant(d,
"dboard_iface_ATR_REG_FULL_DUPLEX",SWIG_From_int(static_cast< int
>(uhd::usrp::dboard_i
^
gr-uhd/swig/CMakeFiles/_uhd_swig.dir/build.make:70: recipe for target
'gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o' failed
make[2]: ***
[gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o] Error 1
CMakeFiles/Makefile2:13348: recipe for target
'gr-uhd/swig/CMakeFiles/_uhd_swig.dir/all' failed
make[1]: *** [gr-uhd/swig/CMakeFiles/_uhd_swig.dir/all] Error 2
Makefile:160: recipe for target 'all' failed
make: *** [all] Error 2
*Qn-2 When installing using pybombs can I choose uhd version. I believe
it is using 3.10 but I need 3.009.003 *
Thanks
Sumit
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio