Hello YJ, Each version of UHD knows where to download the correct matching FPGA image. What has most likely happened is that when you installed the new UHD you did not also rebuild GNU Radio. Is it possible that you did not install the newer UHD? normally it would overwrite the older UHD and you would actually see a different error where GNU Radio recognizes that UHD has been updated and that GNU Radio needs to be rebuilt.
After you have GNU Radio using the version of UHD that you want, then follow the instructions from the error message to download the matching FPGA image and load it onto the X310. "Please run: "/usr/lib/x86_64-linux-gnu/uhd/utils/uhd_images_downloader.py" Then burn a new image to the on-board flash storage of your USRP X3xx device using the image loader utility. Use this command: "/usr/bin/uhd_image_loader" --args="type=x300,addr=192.168.30.2" " On Mon, Jul 30, 2018 at 10:35 AM, Zhan Yanjun <zyan...@dso.org.sg> wrote: > Hello, > > > > I am relatively new to the SDR scene, and I have set up the UHD and X310 > drivers in my computer. I used gnuradio-companion to create a simple > flowchart to test the receiving and recording of signals, and I came across > this error: > > > > -- X300 initialization sequence... > -- Determining maximum frame size... 8000 bytes. > -- Setup basic communication... > Traceback (most recent call last): > File "/home/user/Desktop/ZYJ X310 files/top_block.py", line 340, in > <module> > main() > File "/home/user/Desktop/ZYJ X310 files/top_block.py", line 328, in main > tb = top_block_cls() > File "/home/user/Desktop/ZYJ X310 files/top_block.py", line 106, in > __init__ > channels=range(4), > File "/usr/lib/python2.7/dist-packages/gnuradio/uhd/__init__.py", line > 122, in constructor_interceptor > return old_constructor(*args) > File "/usr/lib/python2.7/dist-packages/gnuradio/uhd/uhd_swig.py", line > 2683, in make > return _uhd_swig.usrp_source_make(*args) > > *RuntimeError: RuntimeError: Expected FPGA compatibility number 33, but > got 35: *The FPGA image on your device is not compatible with this host > code build. > Download the appropriate FPGA images for this version of UHD. > Please run: > > "/usr/lib/x86_64-linux-gnu/uhd/utils/uhd_images_downloader.py" > > Then burn a new image to the on-board flash storage of your > USRP X3xx device using the image loader utility. Use this command: > > "/usr/bin/uhd_image_loader" --args="type=x300,addr=192.168.30.2" > > For more information, refer to the UHD manual: > > http://files.ettus.com/manual/page_usrp_x3x0.html#x3x0_flash > > > > > > According to this line: > > > > *RuntimeError: RuntimeError: Expected FPGA compatibility number 33, but > got 35: * > > This means that the UHD version, which I installed to be 3.10.3.0, is > expecting an FPGA version lower than that flashed in the X310. As a result, > I installed the latest UHD version 3.13.0.0, and tried it again. However, > the same error was shown. This seems very strange, as now the newest UHD > version expects an older FPGA image version. > > > > Please correct me if I misinterpret the error message. > > > > Please advise me on this matter, what should I do in this scenario? The > X310 is not mine, and I cannot just flash another FPGA version into the > hardware. > > > > Is there a list of corresponding FPGA compatibility numbers with the > matching UHD versions? This may help me to troubleshoot and match the FPGA > image with the correct UHD version. > > > > Thanks in advance, > > YJ > > > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > >
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
