Thank you for your response. Since this is my first issue on
'discuss-gnuradio', I am not sure how to get my reply to you posted in
the thread. This looks like it might work. If not, please let me know
what to do.
I did the "sudo ldconfig" and it got rid of the "include could not find
load file: GrPython", but not the other problem, so I decided to start
from scratch.
I have
Raspberry Pi 3 B+
Rasbian Linux (v2)
I deleted the folder 'gr-radioteletype'
download zip from https://github.com/bitglue/gr-radioteletype
extract zip to /home/pi
cd ~/gr-radioteletype-master
mkdir build
cd build
cmake ../
make
[ 5%] Building CXX object
lib/CMakeFiles/gnuradio-radioteletype.dir/async_word_extractor_bb_impl.cc.o
[ 10%] Building CXX object
lib/CMakeFiles/gnuradio-radioteletype.dir/baudot_decode_bb_impl.cc.o
[ 15%] Building CXX object
lib/CMakeFiles/gnuradio-radioteletype.dir/baudot_encode_bb_impl.cc.o
In file included from
/home/pi/gr-radioteletype-master/lib/baudot_encode_bb_impl.cc:26:0:
/home/pi/gr-radioteletype-master/lib/baudot_encode_bb_impl.h:65:5:
error: narrowing conversion of ‘-1’ from ‘int’ to ‘char’ inside { }
[-Wnarrowing]
};
^
/home/pi/gr-radioteletype-master/lib/baudot_encode_bb_impl.h:100:5:
error: narrowing conversion of ‘-1’ from ‘int’ to ‘char’ inside { }
[-Wnarrowing]
};
^
/home/pi/gr-radioteletype-master/lib/baudot_encode_bb_impl.h:100:5:
error: narrowing conversion of ‘-1’ from ‘int’ to ‘char’ inside { }
[-Wnarrowing]
lib/CMakeFiles/gnuradio-radioteletype.dir/build.make:110: recipe for
target
'lib/CMakeFiles/gnuradio-radioteletype.dir/baudot_encode_bb_impl.cc.o'
failed
make[2]: ***
[lib/CMakeFiles/gnuradio-radioteletype.dir/baudot_encode_bb_impl.cc.o]
Error 1
CMakeFiles/Makefile2:137: recipe for target
'lib/CMakeFiles/gnuradio-radioteletype.dir/all' failed
make[1]: *** [lib/CMakeFiles/gnuradio-radioteletype.dir/all] Error 2
Makefile:138: recipe for target 'all' failed
make: *** [all] Error 2
Both of the error messages were repeated *many* times. I looked at the
code for baudot_encode_bb_impl.h, but could not see any problems with
it.
I appreciate any help you can give.
Best wishes,
Barry
On 2019-06-10 00:29, Kyeong Su Shin wrote:
Hello Barry:
Did you try "sudo ldconfig"?
If so, could you provide us the relevant software versions (GNU Radio
version, Linux distro type, etc) and the full steps that you took to
build the module? gr-radioteletype from "
https://github.com/bitglue/gr-radioteletype/ " builds and runs fine on
my machine (tm).
Regards,
Kyeong Su Shin
________________________________
보낸 사람: ba...@dcsmail.net <ba...@dcsmail.net> 대신 Discuss-gnuradio
<discuss-gnuradio-bounces+ksshin=postech.ac...@gnu.org>
보낸 날짜: 2019년 6월 10일 월요일 오전 5:08:32
받는 사람: discuss-gnuradio@gnu.org
제목: [Discuss-gnuradio] RTTY receiver
I have been a real-time programmer for over 50 years, and a ham for 66
years, but am new to Gnu Radio. My project is to build a complete RTTY
receiver with SDR. In looking about for any applicable code, I found
gr-radioteletype, but seem to be missing some of the pieces. Using the
cmake, make, and make install steps I was able to get the flow graph to
work, but when I try to execute it I get:
"from radioteletype.demodulators import rtty_demod_cb
No module named radioteletype.demodulators"
and
"include could not find load file: GrPython"
What am I missing? I have searched for GrPython and not found any
mention of it.
As an alternative, I have the RTTY signal demodulated into a bit
stream,
and I have Python code to extract RTTY characters from a bit stream,
but
haven't figured out how to plug the two together.
Any help on either issue would be appreciated greatly.
Thanks, Barry KV4FV
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio