Hello Barry, Thanks also to you for the help, but the problem is everyone is trying to help me Saying what to do as I know how Linux works. Unfortunately I am a beginner user and do not know anything about Linux. Just starting and following all you suggestions but the problem is I do not understand What to do if some says for example start as administrator as how I saw it is different from windows O.S.
BTW I have tried how you suggested me but it did not work maybe because how I said before Did not do correctly the commands. Here is what I've done: I have opened the Terminal and typed gedit which is the editor. Pasted the 4 lines. Closed the file saving it in Enzo which is the folder I see on the Desktop Always in the terminal I have typed: sudo cp -v ~/Desktop/enzo/99-usb-serial.rules but after have inserted the requested password I got the error: cp: missing destination file operand after '/home/enzo/Desktop/enzo/99-usb-serial.rules' Where am I still missing? Finally you said to be sure to set the Device name; mine is "hw:CARD=V20,DEV=0" How to know the Device name? I can just say that it is a Funcube Dongle Pro Plus. Thanks to you and to everyone and please apologise if I am bothering somebody 73 de Enzo IK8OZV EasyLog 5 BetaTester EasyLog PDA BetaTester WinBollet BetaTester D.C.I. CheckPoint Regione Campania Skype: ik8ozv8520 ********************************* ****** GSM +39 328 7110193 ****** ***** SMS +39 328 7110193 ***** ********************************* > -----Messaggio originale----- > Da: Barry Duggan <ba...@dcsmail.net> > Inviato: martedì 28 aprile 2020 01:48 > A: vim...@alice.it > Cc: Discuss Gnuradio <discuss-gnuradio@gnu.org> > Oggetto: Re: Again on FCDPROPLUS > > Vincenzo, > > Here is what you need to do to set up udev rules: > > In any of your folders (<your folder>), create a file named '99-usb- > serial.rules' with the following content: > > SUBSYSTEMS=="usb" ATTRS{idVendor}=="04d8" ATTRS{idProduct}=="fb31" > MODE:="0666" > > Save the file. Then, in a Terminal screen: > > cd /etc/udev/rules.d > sudo cp -v ~/<your folder>/99-usb-serial.rules . # note the > period! > sudo udevadm trigger > > Be sure to set the Device name; mine is "hw:CARD=V20,DEV=0" (without the > quotes). If that doesn't work, follow the procedure in > https://wiki.gnuradio.org/index.php/Audio_Source#Device_Name starting > with "For Linux ALSA users...". > > Let me know how it works for you. > -- > Barry Duggan KV4FV > > On Sun, 26 Apr 2020 18:29:17 +0200, Vincenzo Mone wrote: > > Hello, > > Please I have a doubt. > > Reading on the FCDPROPLUS site I read: > > Important > Don't forget the udev rules: For instance: > > Udev rules for the Funcube Dongle Pro (0xfb56) and Pro+ (0xfb31) > > HIDAPI/libusb: > > SUBSYSTEMS=="usb" ATTRS{idVendor}=="04d8" ATTRS{idProduct}=="fb56" > MODE:="0666" SUBSYSTEMS=="usb" ATTRS{idVendor}=="04d8" > ATTRS{idProduct}=="fb31" MODE:="0666" > > HIDAPI/hidraw: > > KERNEL=="hidraw*", ATTRS{busnum}=="1", ATTRS{idVendor}=="04d8", > ATTRS{idProduct}=="fb56", MODE="0666" KERNEL=="hidraw*", > ATTRS{busnum}=="1", ATTRS{idVendor}=="04d8", > ATTRS{idProduct}=="fb31", > MODE="0666 > > Please what does it means? > > Maybe I am missing something. > > Any help? > > Thanks > > 73 de Enzo IK8OZV > EasyLog 5 BetaTester > EasyLog PDA BetaTester > WinBollet BetaTester > D.C.I. CheckPoint Regione Campania > Skype: ik8ozv8520