I probably should have added a modification to your flow graph using an Unpack block that would allow your flow graph to work and to show what I was describing.
Jeff ________________________________________ From: Discuss-gnuradio <discuss-gnuradio-bounces+e070832=hotmail....@gnu.org> on behalf of Jeff S <e070...@hotmail.com> Sent: Monday, August 23, 2021 6:21 AM To: Nikoloz Glonti; discuss-gnuradio@gnu.org Subject: Re: Problem with GFSK Mod and Demod example from wiki Nicko, It doesn't look to me like the Time Sink is looking at the same type of data. Symbols (full 8-bit bytes) are going into the GFSK Mod. What is coming out of the GFSK Demod appears to be 8-sample representations of the input byte. You can see from the first tag on the Signal 1 that there are seven zeros followed by a 1, which represents your first input byte of 0x01. If you look at the rest of the samples in 8-bit chunks, you'll see your vector represented (0x01, 0x00, ...). I believe the flow graph will eventually stall since there is 8x more data going into port 0 as there is port 1. As for your original question about the wiki, it looks like it may be referencing a later version than what I have (I am using v3.8) because there is an "Unpack" configuration option in the GFSK Mod that I don't have, and it may be the same for you (I didn't see you post version info of what you are using). I am not sure at this point if that is what is causing the wiki example to work, while your example does not. Hope my inarticulate description helps some. Jeff ________________________________________ From: Discuss-gnuradio <discuss-gnuradio-bounces+e070832=hotmail....@gnu.org> on behalf of Nikoloz Glonti <n...@glonti.com> Sent: Friday, August 20, 2021 4:01 PM To: discuss-gnuradio@gnu.org Subject: Problem with GFSK Mod and Demod example from wiki Hello everybody, I want to do some simple test of GFSK modulator and demodulator. I used an example from wiki - https://wiki.gnuradio.org/index.php/GFSK_Demod . I copied flowgraph, but my Time sink shows me only signal on input of modulator - output signal is really weird - some peaks... Why I can't get the same results as shown on wiki? Niko