Hi Derek and Daniel, Thank you very much! Will use your suggestions.
George On Fri, Jul 29, 2022 at 7:51 AM Derek Kozel <de...@bitstovolts.com> wrote: > Docker on a Mac can be setup with the networking passthrough to let the > X310 and N310 work. The limitation is specifically on USB device > passthrough. > > Not relevant to your issue specifically, but the Analog Devices > ADALM-PLUTO educational SDR uses USB but identifies as a network card so > interestingly it is possible to work around the limitation. The same > limitation on USB devices existed until recently with the Windows Subsystem > for Linux but that is improving over time. > > Regards, > Derek > > On 7/28/2022 8:06 PM, George Edwards wrote: > > Hi Marcus, do you know if a Docker Container on Mac talk to either the > X310 or N310 radio? George > > On Thu, Jul 28, 2022, 11:32 AM Marcus Müller <mmuel...@gnuradio.org> > wrote: > >> Hi George, >> >> Docker on Mac OS cannot pass through USB devices: >> >> >> https://docs.docker.com/desktop/faqs/general/#can-i-pass-through-a-usb-device-to-a-container >> >> So, this is sadly impossible. >> >> Best regards, >> Marcus >> >> On 7/28/22 17:03, George Edwards wrote: >> > Hello GNURadio Community! >> > >> > I am working with Gnuradio 3.9 on a Mac. Gnuradio runs inside a Docker >> > Container. I build a Gnuradio flow graph with a soapy HackRF source >> > block to interface with the HackRF hardware. When I run the flow >> > graph, it says there is no matching HackRF. >> > >> > Will appreciate any suggestions, thank you. >> > George >> >> >