Hi Cinaed, Thank you very much! I will check to see if I can do a more up to date hackrf version download. George
On Fri, Aug 12, 2022, 4:28 PM Cinaed Simson <cinaed.sim...@gmail.com> wrote: > It sounds like you didn't > > apt install libhackrf-dev > > If you did install the libraries, then you may have to update the firmware. > > Post the entire results from > > apt list --installed | grep hackrf > > so we can see the versions. There should be 2 entries. > > Note the date of the firmware - 2014 - was first year the hackrf was > released via Kickstart. > > -- Cinaed > > > > On 8/3/22 05:15, George Edwards wrote: > > Hello GNURadio Community, > > I built a grc flowgraph in Gnuradio 3.9.5 on Ubuntu 20.04 inside Microsoft > VirtualBox. I have a HackRF One radio hardware. I installed the hackrf > drivers in Ubuntu with command: sudo apt-get install -y hackrf > and confirmed the installation. I connected the HackRF One board to my > computer and in the Terminal prompt entered the command hackrf_info and > received the response that it does not see the Hackrf board. > > And true to form when I ran the flowgraph, I get the following error > message: > RuntimeError: no hackrf device matches > > Why is Ubuntu 20.04 running inside MS VirtualBox not seeing the HackRf > board with the HackRf drivers installed. And, how do I resolve this issue? > > Will appreciate any help to resolve this issue. > > George > > >
