Hi Cinaed, Yes, sorry that was a typo. The flag I have been using is: -DCMAKE_FIND_ROOT_PATH=/usr (not =usr/) Running cmake .. from $HOME/gr-customModule/build without that flag still results in the error.
I am unsure what you mean by remove CMAKE_FIND_ROOT_PATH, are you saying you believe I need to alter my cmake installation for this to work without the flag? Doing some more digging through the wiki, I did find that I could check my gnuradio configuration information using gnuradio-config-info. If I run gnuradio-config-info -prefix I get: /usr/ If this is related to the cmake root path, it seems to be set correctly by default when I installed gnuradio through the ppa. I also tried upgrading my version of cmake to see if that would help. I removed the old version using apt (3.16.3) and installed the one managed through snap (3.24.2). This however did not solve the issue. I am going to try uninstalling gnuradio with apt again, but will build gnuradio from source instead, and see if there have been any changes that may have fixed this. If not, and if there are no objections, I am inclined to submit an issue ticket since there seems to be problems with the cmake imported targets * gnuradio::gnuradio-runtime * Boost::date_time When building an OOT using gr_modtool on fresh installs of v3.10.4.0 and Ubuntu 20.04. Thank you, Michael Matthews Graduate Software Engineer Mobile: +1 847 714 4809 [https://micro-x.com/esignature/micro-x-lo...@2x-white-bg.png]<https://micro-x.com> 855 South 192nd St, Suite 600 SeaTac, WA, 98148, United States www.micro-x.com<https://micro-x.com> From: Cinaed Simson <cinaed.sim...@gmail.com> Sent: Monday, October 17, 2022 4:41 PM To: Michael Matthews <mmatth...@micro-x.com>; GNURadio Discussion List <discuss-gnuradio@gnu.org> Subject: Re: Problems with gr-modtool on Ubuntu 20.04 (gnuradio 3.10.4) The cmake flag -DCMAKE_FIND_ROOT_PATH=usr/ has an incorrect root element - it's root element. Make sure the CMAKE_FIND_ROOT_PATH defined by you has been removed. Then start a new build: cd $HOME/gr-customModule rm -fr build mkdir bulid cd build cmake .. -- Cinaed On 10/17/22 11:43, Michael Matthews wrote: Hi Cinaed, I took your suggestion of making the customModule with gr-modtool at the $HOME directory, in case this may be required. The tutorial implied this was not necessary, but I gave it a shot anyway. Invoking cmake from $HOME/gr-customModule/build as cmake .. resulted in no change and the error is still present if I do not use the flag: -DCMAKE_FIND_ROOT_PATH=usr/ When you mention there are 9 CMakeLists.txt files in your directory, I believe those are the same as I listed. Could you clarify if you have any outside those specific paths I mentioned? I also wanted to follow up on your suggestion that I should not be seeing the line -- Using install prefix: /usr/local in my cmake output. It seems that that is printed from $HOME/gr-customModule/lib/CMakeLists.txt line 47 (in the print summary section). It prints CMAKE_INSTALL_PREFIX, which is /usr/local by default on UNIX systems according to cmake documentation. Could you also clarify what I should be seeing instead? You also mention that if invoking cmake doesn't work, it most likely operator error. Again, I am new to gnuradio and I am unsure what that error would be. I followed the tutorials verbatim. I am running gnuradio 3.10.4, cmake 3.16.3, and Ubuntu 20.04. I have tested this now on two clean VM installs of Ubuntu 20.04 and gnuradio 3.10.4 (through the apt PPA) and am still seeing this error. I appreciate the help! Cheers, Michael Matthews Graduate Software Engineer Mobile: +1 847 714 4809 [https://micro-x.com/esignature/micro-x-lo...@2x-white-bg.png]<https://aus01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fmicro-x.com%2F&data=05%7C01%7Cmmatthews%40micro-x.com%7C287cb7d25ae24c04f20a08dab098ef66%7Cad206e7b8a5d4d9aabf6ab3a9fd2c934%7C0%7C0%7C638016468167854213%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=vgFUEsxxOnxgHAJR4AtreU1EuzZAUn34IaggxushrDA%3D&reserved=0> 855 South 192nd St, Suite 600 SeaTac, WA, 98148, United States www.micro-x.com<https://aus01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fmicro-x.com%2F&data=05%7C01%7Cmmatthews%40micro-x.com%7C287cb7d25ae24c04f20a08dab098ef66%7Cad206e7b8a5d4d9aabf6ab3a9fd2c934%7C0%7C0%7C638016468167854213%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=vgFUEsxxOnxgHAJR4AtreU1EuzZAUn34IaggxushrDA%3D&reserved=0> From: Cinaed Simson <cinaed.sim...@gmail.com><mailto:cinaed.sim...@gmail.com> Sent: Thursday, October 13, 2022 8:57 PM To: Michael Matthews <mmatth...@micro-x.com><mailto:mmatth...@micro-x.com> Subject: Re: Problems with gr-modtool on Ubuntu 20.04 (gnuradio 3.10.4) The tool gr-modtool creates the directories and the files needed by cmake in $HOME/gr-customModule There are 9 CMakeLists.txt in my directory - ones for grc, python, etc. Then cmake creates the Makefiles needed by make to perform the install on the system. You should be able to create a build directory $HOME/gr-customModule/build and if you cd $HOME/gr-customModule/build then type cmake .. it should work. If it doesn't then it's most likely operator error. Further, you're not required to follow the procedure in the tutorial but then you're on your own. I'm running gnuradio 3.10.4 and cmake 3.18.4-2 -- Cinaed On 10/8/22 18:56, Michael Matthews wrote: Hi Cinead, I should clarify that I am following the tutorial for Creating C++ OOT with gr-modtool. Cmake was invoked from ./build with as $ cmake .. and it resulted in the error I listed previously. I also tried invoking cmake from . as $ cmake -S . -B build/ This also resulted in the same error. Vasil did give me a solution that did seem to work, which was to invoke cmake from ./build as $ cmake -DCMAKE_FIND_ROOT_PATH=/usr .. After cmake worked, I used $ make $ sudo make install and that worked as intended. I should also mention that from my experience with gnuradio 3.10.4, lib/CMakeLists.txt was already created prior to invoking cmake for the first time. $ gr_modtool newmod customModule from .. seemed to create all the CMakeLists.txt files in the following directories: . ./apps ./docs ./docs/doxygen ./grc ./include/gnuradio/customModule ./lib ./python/customModule ./python/customModule/bindings Using $ gr_modtool add multDivSelect from . added no new CMakeLists.txt files and only edited ./grc/CMakeLists.txt (according to what the tool printed to the terminal) I should also mention that I installed gnuradio 3.10.4 on Ubuntu 20.04 from the ppa using: $ sudo add-apt-repository ppa:gnuradio/gnuradio-releases $ sudo apt-get update $ sudo apt-get install gnuradio $ sudo apt-get install gnuradio-dev \ libiio-dev \ libad9361-dev \ libspdlog-dev \ python3-packaging \ python3-jsonschema \ cmake \ doxygen \ clang-format This set of commands was taken from the InstallGR<https://aus01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwiki.gnuradio.org%2Findex.php%3Ftitle%3DInstallingGR&data=05%7C01%7Cmmatthews%40micro-x.com%7C287cb7d25ae24c04f20a08dab098ef66%7Cad206e7b8a5d4d9aabf6ab3a9fd2c934%7C0%7C0%7C638016468167854213%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=cYf2DtyY9grutBoJ4tLNMFuzdVqFt5zgzU9P0I6%2FhkQ%3D&reserved=0> tutorial, UbuntuInstall<https://aus01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwiki.gnuradio.org%2Findex.php%3Ftitle%3DUbuntuInstall&data=05%7C01%7Cmmatthews%40micro-x.com%7C287cb7d25ae24c04f20a08dab098ef66%7Cad206e7b8a5d4d9aabf6ab3a9fd2c934%7C0%7C0%7C638016468168010443%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=DBvOCJwp1oDrhOMGj50sJJxRKPJlucB33QXiUrpLZwk%3D&reserved=0> tutorial, and the Creating C++ OOT with gr-modtool<https://aus01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwiki.gnuradio.org%2Findex.php%3Ftitle%3DCreating_c%252B%252B_OOT_with_gr-modtool&data=05%7C01%7Cmmatthews%40micro-x.com%7C287cb7d25ae24c04f20a08dab098ef66%7Cad206e7b8a5d4d9aabf6ab3a9fd2c934%7C0%7C0%7C638016468168010443%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=RpV%2BaPwj4iP3j%2BsZB2xvcuwF3X%2Fs3%2Be%2FsmH2Y2ePTlQ%3D&reserved=0> tutorial. I hope this helps clarify my issue. Thank you, Michael Matthews Graduate Software Engineer Mobile: +1 847 714 4809 [https://micro-x.com/esignature/micro-x-lo...@2x-white-bg.png]<https://aus01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fmicro-x.com%2F&data=05%7C01%7Cmmatthews%40micro-x.com%7C287cb7d25ae24c04f20a08dab098ef66%7Cad206e7b8a5d4d9aabf6ab3a9fd2c934%7C0%7C0%7C638016468168010443%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=zBOqAIyldfkypb941Np2M7wRbt%2FZ%2BU3FNhRw4EILELI%3D&reserved=0> 855 South 192nd St, Suite 600 SeaTac, WA, 98148, United States www.micro-x.com<https://aus01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fmicro-x.com%2F&data=05%7C01%7Cmmatthews%40micro-x.com%7C287cb7d25ae24c04f20a08dab098ef66%7Cad206e7b8a5d4d9aabf6ab3a9fd2c934%7C0%7C0%7C638016468168010443%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=zBOqAIyldfkypb941Np2M7wRbt%2FZ%2BU3FNhRw4EILELI%3D&reserved=0> From: Discuss-gnuradio <discuss-gnuradio-bounces+mmatthews=micro-x....@gnu.org><mailto:discuss-gnuradio-bounces+mmatthews=micro-x....@gnu.org> On Behalf Of Cinaed Simson Sent: Saturday, October 8, 2022 5:44 PM To: discuss-gnuradio@gnu.org<mailto:discuss-gnuradio@gnu.org> Subject: Re: Problems with gr-modtool on Ubuntu 20.04 (gnuradio 3.10.4) Oops - you should only be invoking cmake once - not twice - as I implied in my reply. It's cmake then make. -- Cinaed On 10/8/22 16:28, Cinaed Simson wrote: Hi Michael - you really need to show where and how you're invoking cmake. The first time you invoke cmake in the ./build directory it should be as cmake .. so it can create the lib/CMakeLists.txt which incidentally, it can't find. Also, you should NOT be seeing this entry -- Using install prefix: /usr/local the first time you invoke cmake. Otherwise, my guess is you're just invoking cmake incorrectly. If you have an alias for cmake try using \cmake .. the first time you run cmake which will override the alias. -- Cinaed On 10/2/22 22:21, Michael Matthews wrote: Hello, I am new to gnuradio and have been going through the tutorials. I have been specifically interested in Creating C++ OOT with gr-modtool<https://aus01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwiki.gnuradio.org%2Findex.php%3Ftitle%3DCreating_c%252B%252B_OOT_with_gr-modtool&data=05%7C01%7Cmmatthews%40micro-x.com%7C287cb7d25ae24c04f20a08dab098ef66%7Cad206e7b8a5d4d9aabf6ab3a9fd2c934%7C0%7C0%7C638016468168010443%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=RpV%2BaPwj4iP3j%2BsZB2xvcuwF3X%2Fs3%2Be%2FsmH2Y2ePTlQ%3D&reserved=0> but I seem to be getting errors when trying to use cmake to create the make files. My cmake errors are: -- The CXX compiler identification is GNU 9.4.0 -- The C compiler identification is GNU 9.4.0 -- Check for working CXX compiler: /bin/c++ -- Check for working CXX compiler: /bin/c++ -- works -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Detecting CXX compile features -- Detecting CXX compile features - done -- Check for working C compiler: /bin/cc -- Check for working C compiler: /bin/cc -- works -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Detecting C compile features -- Detecting C compile features - done -- Looking for pthread.h -- Looking for pthread.h - found -- Performing Test CMAKE_HAVE_LIBC_PTHREAD -- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Failed -- Looking for pthread_create in pthreads -- Looking for pthread_create in pthreads - not found -- Looking for pthread_create in pthread -- Looking for pthread_create in pthread - found -- Found Threads: TRUE -- Found PkgConfig: /bin/pkg-config (found version "0.29.1") -- Checking for module 'gmp' -- Found gmp, version 6.2.0 -- Found GMP: /usr/lib/x86_64-linux-gnu/libgmpxx.so -- Using GMP. -- Found MPLIB: /usr/lib/x86_64-linux-gnu/libgmpxx.so -- Found Boost: /lib/x86_64-linux-gnu/cmake/Boost-1.71.0/BoostConfig.cmake (found suitable version "1.71.0", minimum required is "1.71.0") found components: date_time program_options system regex thread unit_test_framework -- Found Volk: Volk::volk -- User set python executable /usr/bin/python3 -- Found PythonInterp: /usr/bin/python3 (found version "3.8.10") -- Found PythonLibs: /usr/lib/x86_64-linux-gnu/libpython3.8.so (found suitable exact version "3.8.10") -- Check if the system is big endian -- Searching 16 bit integer -- Looking for sys/types.h -- Looking for sys/types.h - found -- Looking for stdint.h -- Looking for stdint.h - found -- Looking for stddef.h -- Looking for stddef.h - found -- Check size of unsigned short -- Check size of unsigned short - done -- Using unsigned short -- Check if the system is big endian - little endian -- Performing Test HAVE_VISIBILITY_HIDDEN -- Performing Test HAVE_VISIBILITY_HIDDEN - Success -- Performing Test HAVE_WARN_SIGN_COMPARE -- Performing Test HAVE_WARN_SIGN_COMPARE - Success -- Performing Test HAVE_WARN_ALL -- Performing Test HAVE_WARN_ALL - Success -- Performing Test HAVE_WARN_NO_UNINITIALIZED -- Performing Test HAVE_WARN_NO_UNINITIALIZED - Success -- Found Git: /bin/git -- Found Doxygen: /usr/local/bin/doxygen (found version "1.9.5 (2f6875a5ca481a69a6f32650c77a667f87d25e88)") found components: doxygen missing components: dot -- Using install prefix: /usr/local -- Building for version: 1.0.0.0 / 1.0.0 -- No C++ unit tests... skipping -- PYTHON and GRC components are enabled -- Python checking for pygccxml - found -- Found PythonLibs: /usr/lib/x86_64-linux-gnu/libpython3.8.so -- Performing Test HAS_FLTO -- Performing Test HAS_FLTO - Success -- LTO enabled -- Configuring done CMake Error in lib/CMakeLists.txt: Imported target "gnuradio::gnuradio-runtime" includes non-existent path "/include" in its INTERFACE_INCLUDE_DIRECTORIES. Possible reasons include: * The path was deleted, renamed, or moved to another location. * An install or uninstall procedure did not complete successfully. * The installation package was faulty and references files it does not provide. CMake Error in lib/CMakeLists.txt: Imported target "gnuradio::gnuradio-runtime" includes non-existent path "/include" in its INTERFACE_INCLUDE_DIRECTORIES. Possible reasons include: * The path was deleted, renamed, or moved to another location. * An install or uninstall procedure did not complete successfully. * The installation package was faulty and references files it does not provide. CMake Error in python/customModule/bindings/CMakeLists.txt: Imported target "Boost::date_time" includes non-existent path "/include" in its INTERFACE_INCLUDE_DIRECTORIES. Possible reasons include: * The path was deleted, renamed, or moved to another location. * An install or uninstall procedure did not complete successfully. * The installation package was faulty and references files it does not provide. CMake Error in python/customModule/bindings/CMakeLists.txt: Imported target "Boost::date_time" includes non-existent path "/include" in its INTERFACE_INCLUDE_DIRECTORIES. Possible reasons include: * The path was deleted, renamed, or moved to another location. * An install or uninstall procedure did not complete successfully. * The installation package was faulty and references files it does not provide. -- Generating done CMake Generate step failed. Build files cannot be regenerated correctly. Has anyone else had this issue before? I have tried uninstalling and reinstalling using apt, following the instructions from the wiki, but I am unsure where to go from there. Any help solving this would be greatly appreciated! Thank you, Michael Matthews Graduate Software Engineer Mobile: +1 847 714 4809 [cid:image001.jpg@01D8E25B.E4CA63C0]<https://aus01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fmicro-x.com%2F&data=05%7C01%7Cmmatthews%40micro-x.com%7C287cb7d25ae24c04f20a08dab098ef66%7Cad206e7b8a5d4d9aabf6ab3a9fd2c934%7C0%7C0%7C638016468168010443%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=zBOqAIyldfkypb941Np2M7wRbt%2FZ%2BU3FNhRw4EILELI%3D&reserved=0> 855 South 192nd St, Suite 600 SeaTac, WA, 98148, United States www.micro-x.com<https://aus01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fmicro-x.com%2F&data=05%7C01%7Cmmatthews%40micro-x.com%7C287cb7d25ae24c04f20a08dab098ef66%7Cad206e7b8a5d4d9aabf6ab3a9fd2c934%7C0%7C0%7C638016468168010443%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=zBOqAIyldfkypb941Np2M7wRbt%2FZ%2BU3FNhRw4EILELI%3D&reserved=0>