Ok, thanks! You are a great help! On Thu, Dec 29, 2022 at 8:33 AM Marcus D. Leech <patchvonbr...@gmail.com> wrote:
> On 28/12/2022 23:55, Ali G. Dezfuli wrote: > > seems it's ok: > > > > $ uhd_usrp_probe > > [INFO] [UHD] linux; GNU C++ version 11.3.0; Boost_107400; > > UHD_4.3.0.0-14-g1e718d9b > > [INFO] [USRP2] Opening a USRP2/N-Series device... > > [INFO] [USRP2] Current recv frame size: 1472 bytes > > [INFO] [USRP2] Current send frame size: 1472 bytes > > _____________________________________________________ > > / > > | Device: USRP2 / N-Series Device > > | _____________________________________________________ > > | / > > | | Mboard: N200r4 > > | | hardware: 2576 > > | | mac-addr: 00:80:2f:0a:ce:45 > > | | ip-addr: 192.168.20.2 > > | | subnet: 255.255.255.255 > > | | gateway: 255.255.255.255 > > | | gpsdo: none > > | | serial: F1700B > > | | name: ali_01 > > | | FW Version: 12.4 > > | | FPGA Version: 11.1 > > | | > > | | Time sources: none, external, _external_, mimo > > | | Clock sources: internal, external, mimo > > | | Sensors: mimo_locked, ref_locked > > | | _____________________________________________________ > > | | / > > | | | RX DSP: 0 > > | | | > > | | | Freq range: -50.000 to 50.000 MHz > > | | _____________________________________________________ > > | | / > > | | | RX DSP: 1 > > | | | > > | | | Freq range: -50.000 to 50.000 MHz > > | | _____________________________________________________ > > | | / > > | | | RX Dboard: A > > | | | ID: WBX v3, WBX v3 + Simple GDB (0x0057) > > | | | Serial: EDR29PFXW > > | | | _____________________________________________________ > > | | | / > > | | | | RX Frontend: 0 > > | | | | Name: WBXv3 RX+GDB > > | | | | Antennas: TX/RX, RX2, CAL > > | | | | Sensors: lo_locked > > | | | | Freq range: 68.750 to 2200.000 MHz > > | | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB > > | | | | Bandwidth range: 40000000.0 to 40000000.0 step 0.0 Hz > > | | | | Connection Type: IQ > > | | | | Uses LO offset: No > > | | | _____________________________________________________ > > | | | / > > | | | | RX Codec: A > > | | | | Name: ads62p44 > > | | | | Gain range digital: 0.0 to 6.0 step 0.5 dB > > | | | | Gain range fine: 0.0 to 0.5 step 0.1 dB > > | | _____________________________________________________ > > | | / > > | | | TX DSP: 0 > > | | | > > | | | Freq range: -200.000 to 200.000 MHz > > | | _____________________________________________________ > > | | / > > | | | TX Dboard: A > > | | | ID: WBX v3 (0x0056) > > | | | Serial: EDR29PFXW > > | | | ID: WBX + Simple GDB, WBX v3 + Simple GDB, WBX v4 + Simple > > GDB, WBX-120 + Simple GDB (0x004f) > > | | | Serial: EDR29PFGS > > | | | _____________________________________________________ > > | | | / > > | | | | TX Frontend: 0 > > | | | | Name: WBXv3 TX+GDB > > | | | | Antennas: TX/RX, CAL > > | | | | Sensors: lo_locked > > | | | | Freq range: 68.750 to 2200.000 MHz > > | | | | Gain range PGA0: 0.0 to 31.0 step 1.0 dB > > | | | | Bandwidth range: 40000000.0 to 40000000.0 step 0.0 Hz > > | | | | Connection Type: IQ > > | | | | Uses LO offset: No > > | | | _____________________________________________________ > > | | | / > > | | | | TX Codec: A > > | | | | Name: ad9777 > > | | | | Gain Elements: None > > > You might try backing-out to UHD 4.2 or even UHD 4.1.0.5 (which is what > is packaged with Ubuntu 22.04). > > I recall (haven't found the thread on usrp-users yet) that there was a > problem with the _cal utilities in UHD 4.3. > > I'd recommend that you join the usrp-users mailng list, where more > USRP-specific discussions take place. > > >
