Ryan, Here is an excerpt of the CMake output: -- -- Configuring gr-soapy support... -- Dependency SoapySDR_FOUND = 1 -- Dependency ENABLE_GNURADIO_RUNTIME = ON -- Enabling gr-soapy support. -- Override with -DENABLE_GR_SOAPY=ON/OFF -- SOAPY Version: 0.7.2-unknown -- No C++ unit tests... skipping --
Rick On 2023-02-07 11:12, aardric wrote: > Hail, > Your feedback goes beyond my expectations. Before I follow this > further, here is a summary of my installation attempt as Marcus > requested. I hope that it is a good balance between detail and clutter. > > First to clarify, by 'local' I mean under my home directory (no > superuser install). The OS is opensuse Leap 15.4. > The required Type.h and Types.hpp are in the directory: > > ls ~/.local/include > gnuradio lime pmt SoapySDR > > The sequence of the installation is as follows: > > (1) gnuradio 3.10.5.1 was installed in the usual manner from the cloned > repository. > gnuradio/build> cmake -DCMAKE_INSTALL_PREFIX=~/.local > -DCMAKE_BUILD_TYPE=Release -DPYTHON_EXECUTABLE=/usr/bin/python3 > -DBoost_LIBRARY_DIRS=/usr/lib64 -DQWT_LIBRARIES=/usr/lib64/libqwt.so.6 > -DQWT_INCLUDE_DIRS=/usr/include/qt5/qwt6 -DENABLE_GR_UHD=OFF > -DZEROMQ_LIBRARIES=/usr/local/lib64/libzmq.so > -DZEROMQ_INCLUDE_DIRS=/usr/local/include -DENABLE_GR_SOAPY=OFF ../ > > Environment variables: > LD_LIBRARY_PATH="~/.local/lib" > PYTHONPATH="~/.local/lib64/python3.6/site-packages" > > The installation worked as expected. > > (2) The distro version of soapySDR (branch 0.8) was NOT installed as per > the recommendation of > https://wiki.gnuradio.org/index.php/Soapy#gr-osmosdr%20(Ref:%20https://github.com/pothosware/SoapySDR/wiki/BuildGuide > > SoapySDR-soapy-sdr-0.7.2 was built and installed from a downloaded > archive file. > > SoapySDR-soapy-sdr-0.7.2/build> cmake > -DCMAKE_INSTALL_PREFIX:PATH=~/.local -DENABLE_PYTHON3=OFF > Executing SoapySDRUtil worked as expected. > > (3) LimeSuite 20.10.0 built and installed from downloaded archive file. > LimeSuite-20.10.0/builddir> cmake -DCMAKE_INSTALL_PREFIX:PATH=~/.local > -DENABLE_GUI=ON -DENABLE_UTILITIES=ON -DENABLE_SOAPY_LMS7=ON ../ > > Executing SoapySDRUtil and LimeUtil found hardware and reported as > expected. > > (4) gnuradio build directory was emptied and CMakeCache.txt deleted. > gnuradio/build> cmake -DCMAKE_INSTALL_PREFIX=~/.local > -DCMAKE_BUILD_TYPE=Release -DPYTHON_EXECUTABLE=/usr/bin/python3 > -DBoost_LIBRARY_DIRS=/usr/lib64 -DQWT_LIBRARIES=/usr/lib64/libqwt.so.6 > -DQWT_INCLUDE_DIRS=/usr/include/qt5/qwt6 -DENABLE_GR_UHD=OFF > -DZEROMQ_LIBRARIES=/usr/local/lib64/libzmq.so > -DZEROMQ_INCLUDE_DIRS=/usr/local/include -DENABLE_GR_SOAPY=ON ../ > > Configuration by cmake did not show errors but > gnuradio/build> make -j4 > results in error on missing <SoapySDR/Types.hpp> as mentioned below. > More details upon request. > > cheers, > Rick > > > On 2023-02-07 10:48, Ryan Volz wrote: >> Hi all, >> >> GNU Radio's cmake scripts do check for this situation (SoapySDR not >> found, GR_ENABLE_SOAPY force-enabled) and it should error out when >> `cmake` is run: >> >> https://github.com/gnuradio/gnuradio/blob/main/cmake/Modules/GrComponent.cmake#L71 >> >> The full CMake output would be useful to figuring out why that didn't >> happen. As far as I can tell, CMake should not "find" SoapySDR if its >> headers are missing, but maybe that's where it is going wrong. >> >> Cheers, >> Ryan >> >> On 2/7/23 5:14 AM, Marcus Müller wrote: >>> Hi Ron, Hi Rick, >>> >>> agreed, you probably need that development package. Problem: Without it, >>> the GNU Radio build infrastructure shouldn't even allow for enabling of >>> the SoapySDR components. >>> >>> So, Rick, could you tell us which operating system/distro this is on, >>> and how you did that local installation of SoapySDR, precisely? >>> >>> Best regards, >>> Marcus >>> >>> On 07.02.23 06:19, Ron Economos wrote: >>>> You probably need the development package. >>>> >>>> sudo apt-get install libsoapysdr-dev >>>> >>>> Ron >>>> >>>> On 2/6/23 18:37, aardric wrote: >>>>> I executed the following steps which I think are consistent with >>>>> documentation on the wiki. >>>>> >>>>> (1) local installation of SoapySDR 0.7.2 appears to work. >>>>> (2) build and local install of gnuradio 3.10.5.1 works as expected >>>>> with >>>>> -DENABLE_GR_SOAPY=OFF >>>>> (3) delete the gnuradio/build folder and run cmake with >>>>> -DENABLE_GR_SOAPY=ON configures without an obvious problem. >>>>> (4) however, make fails with: >>>>> include/gnuradio/soapy/soapy_types.h:15:10: fatal error: >>>>> SoapySDR/Types.hpp: No such file or directory >>>>> 15 | #include <SoapySDR/Types.hpp> >>>>> >>>>> I'm hoping to get advice on whether the above procedure was reasonable >>>>> before I (as a non developer) attempts to reverse engineer and >>>>> debug the >>>>> above process. I hesitate to raise an issue for something which may be >>>>> obvious or a problem with my particular installation. >>>>> >>>>> Rick >>>>> >>>>> >>>>> >>>> >>>