On 13/08/2023 00:36, Ali G. Dezfuli wrote:
Hi all,
I'd like to measure the round-trip delay (RTD) between two B200 USRPs.
For that, I send a raised-cosined-filtered, BPSK modulated
PN-sequence, and as soon as
I get this signal at the receiver, send back the same sequence from
the Rx to the Tx, and by correlation, I find the RTD.
The question is that the measured RTD is not fixed. I wonder how can I
make it fixed when the distance between the two USRPs is fixed.
After that (A -> B -> A) I want to do that in reverse order (B -> A ->
B) and expect to have the same RTD.
Thanks
In your scenario, the latency will necessarily be variable--after all
your samples are entering a computer program where those
samples are processed and then sent back in the other direction.
Since computer software on a general-purpose operating
system cannot have fixed latency at fine-grained levels, this is
completely expected.
This document may help:
https://kb.ettus.com/Synchronizing_USRP_Events_Using_Timed_Commands_in_UHD
