Hi Marcus, I replied to Robin, but not the list, sorry. One of the things I did in the past (over 2 years ago) was to port gr-limesdr to gnuradio 3.9, that work is available at https://github.com/chrisjohgorman/gr-limesdr . I did it to try to understand how to port something with gr_modtool and had planned to buy a limesdr. I believe this will still work with 3.10, but without any hardware to test out, I'm not 100% sure.
Best regards, Chris On Sun, Aug 13, 2023 at 3:50 PM Marcus D. Leech <patchvonbr...@gmail.com> wrote: > On 13/08/2023 14:55, robin ivetic wrote: > > Hello, > > I try to install gr-limesdr on arch linux true pacman, but after gnuradio > upgrade on 3.10.7, can't do that any more, and compiling gr-limesdr gives > me this, and files are there > > CMake Warning (dev) at /lib/cmake/gnuradio/GrPython.cmake:21 > (find_package): > Policy CMP0148 is not set: The FindPythonInterp and FindPythonLibs modules > are removed. Run "cmake --help-policy CMP0148" for policy details. Use > the cmake_policy command to set the policy and suppress this warning. > > Call Stack (most recent call first): > /lib/cmake/gnuradio/GnuradioConfig.cmake:37 (include) > CMakeLists.txt:77 (find_package) > This warning is for project developers. Use -Wno-dev to suppress it. > > CMake Warning (dev) at /lib/cmake/gnuradio/GrPython.cmake:27 > (find_package): > Policy CMP0148 is not set: The FindPythonInterp and FindPythonLibs modules > are removed. Run "cmake --help-policy CMP0148" for policy details. Use > the cmake_policy command to set the policy and suppress this warning. > > Call Stack (most recent call first): > /lib/cmake/gnuradio/GnuradioConfig.cmake:37 (include) > CMakeLists.txt:77 (find_package) > This warning is for project developers. Use -Wno-dev to suppress it. > > -- Extracting version information from git describe... > -- Found pybind11: //include (found version "2.11.1") > -- Configuring LimeSuite C++ Libraries... > CMake Error at /lib/cmake/LimeSuite/LimeSuiteConfig.cmake:49 (message): > cannot find LimeSuite includes in //include > Call Stack (most recent call first): > CMakeLists.txt:135 (find_package) > > I have LimeSDR-USB, and when I'm using osmosdr sink block or Soapy LimeSDR > sink below 30MHz, I'm geting this error, explained great here > <https://discourse.myriadrf.org/t/mcu-error-3-sxr-tune-failed-on-limesdr-usb/5303>,and > question is more for Myriadrf > > <https://discourse.myriadrf.org/t/mcu-error-3-sxr-tune-failed-on-limesdr-usb/5303> > MCU error 3 (SXR tune failed) on LimeSDR USB > <https://discourse.myriadrf.org/t/mcu-error-3-sxr-tune-failed-on-limesdr-usb/5303> > Hi! I wanted to check LimeGPS project, but was unable to do this. Right > now I’m facing calibration issues when running it: Opening and initializing > device... Reference clock 30.72 MHz Sample rate: 2500000.0 Hz (Host) / > 2500000.0 Hz (RF) Calibrating... Tx Calibration: MCU error 3 (SXR tune > failed) Warning: Failed to calibrate device: Tx Calibration: MCU error 3 > (SXR tune failed) Setup TX stream... Creating GPS task... Using static > location mode. xyz = 1335616.6, -4648136.6, 4144388.5 llh =... > discourse.myriadrf.org > ** > > > MCU error 3 (SXR tune failed) on LimeSDR USB > > but in my case, I will get error when I use more than 11.2e6 bandwith, > that would be reason why I tried with gr-limesdr, but don't know how to > bypass error. > Or maybe someone can comment error to bypass error bellow 30MHz, because > issue is here for a long time, or did someone tried emulate limeSDR USB > with USRP 200 > > Robin > > gr-limesdr hasn't been maintained in nearly 4 years. It isn't compatible > with GR 3.10.X > > >
