On Wed, 2014-09-24 at 13:54 -0400, Richard Pieri wrote: > On 9/24/2014 1:23 PM, Stephen Adler wrote: > > OK... so my question is, how do I configure the boot image to force it > > to include the SAS raid controller driver so I can boot from a disk > > connected to it? > > If it were me, you don't. I avoid doing this because it's a pain in the > ass thanks to the Linux kernel's broken device enumeration mechanism. > Instead, boot from a vanilla SATA disk on a vanilla SATA port set to be > the first BIOS boot device. Optionally, mirror the boot volume with > mdadm and set the two devices as first and second BIOS boot devices. >
Thanks Richard, that's how my system is setup right now. I was hoping to get rid of the generic SATA setup to boot fedora 20 and have a full SAS system booting from the SAS controller. So be it... Cheers. Steve. _______________________________________________ Discuss mailing list [email protected] http://lists.blu.org/mailman/listinfo/discuss
