On 11/15/21 17:36, dan moylan wrote:
jerry feldman <[email protected]> writes:
While I am not familiar with the nuc or the specific
keyboard. Could you try an old USB keyboard.
i've just got the two logitec keyboards, both working off
nano dongles. but note that the keyboards work with no
problems while typing in the password in the fc33 login
screen, but not in the terminal after login. the built-in
touchpad on the keyboards works fine after login.
edward <[email protected]> writes:
https://support.logi.com/hc/en-us/articles/360023464113-Wireless-Touch-Keyboard-K400-Plus-Technical-Specifications
According to this, it's 2.4GHz wireless. Since it sounds
like it and the original are operating erratically, is there
another device in close range that is also using 2.4Ghz? If
so, it could be interfering with the communications between
the keyboard and its receiver.
same comment. my home wireless net is at 5 GHz.
If you have a cordless telephone that also uses the 2.4GHz frequency,
/that/ could also interfere with the keyboard and receiver.
See if the keyboard and receiver have a channel selector and try other
channels.
--
If it doesn't work right out of the box, they're in the wrong business.
_______________________________________________
Discuss mailing list
[email protected]
http://lists.blu.org/mailman/listinfo/discuss
