On October 13, 2025, [email protected] wrote: >Don't grep for nvm, grep for errors, i.e. >dmesg | grep -i err >grep -i err /var/log/messages
$ sudo dmesg | grep -i err [ 0.000000] unchecked MSR access error: RDMSR from 0xc00102f1 at rIP: 0xffffffffa01d3ba3 (mce_setup+0x153/0x190) [ 1.916195] ACPI: Using IOAPIC for interrupt routing [ 2.001896] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 2.001983] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 2.002061] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 2.002154] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 2.002239] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 2.002310] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 2.002380] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 2.002451] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 2.095564] AMD-Vi: Interrupt remapping enabled [ 2.108016] pcieport 0000:00:01.2: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 6, DL_ActiveErr+ [ 2.108924] pcieport 0000:20:03.1: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 6, DL_ActiveErr+ [ 2.109806] pcieport 0000:40:01.1: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 6, DL_ActiveErr+ [ 2.973938] acpi_cpufreq: overriding BIOS provided _PSD data [ 3.366715] igb 0000:44:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s) [ 19.010884] EXT4-fs (md1p1): re-mounted. Opts: errors=remount-ro. Quota mode: none. [ 29.632127] Bluetooth: hci0: FW download error recovery failed (-110) $ grep err /var/log/syslog Nothing suspicious in this output either. Dan > >If an operation reports an error, it should be in these logs. > >> On October 13, 2025, [email protected] wrote: >>>Look at /var/log/messages and/or run "dmesg" and look for I/O errors. It >>>should show you which drive is failing. >> >> Thanks. dmesg hasn't provided any information about any disk errors so >> far: >> >> $ sudo dmesg|grep nvm >> [ 3.279193] nvme nvme0: pci function 0000:01:00.0 >> [ 3.280193] nvme nvme1: pci function 0000:43:00.0 >> [ 3.286725] nvme nvme1: missing or invalid SUBNQN field. >> [ 3.286725] nvme nvme0: missing or invalid SUBNQN field. >> [ 3.287359] nvme nvme0: Shutdown timeout set to 8 seconds >> [ 3.287821] nvme nvme1: Shutdown timeout set to 8 seconds >> [ 3.316978] nvme nvme0: 32/0/0 default/read/poll queues >> [ 3.317747] nvme nvme1: 32/0/0 default/read/poll queues >> [ 3.324548] nvme0n1: p1 >> [ 3.326850] nvme1n1: p1 >> >> $ sudo dmesg|grep -w md1 >> [ 4.207982] md/raid1:md1: active with 2 out of 2 mirrors >> [ 4.223497] md1: detected capacity change from 0 to 3906762752 >> [ 4.224742] md1: p1 >> >> /var/log/syslog has no errors either, except for the usual "I don't >> understand the SMART code you just sent me" errors that happen on >> every boot: >> >> Oct 12 11:57:55 myhost smartd[2197]: Device: /dev/nvme0, number of Error >> Log entries increased from 176 to 179 >> Oct 12 11:57:55 myhost smartd[2197]: Device: /dev/nvme1, number of Error >> Log entries increased from 143 to 146 >> >> Dan >> > _______________________________________________ Discuss mailing list [email protected] https://lists.blu.org/mailman/listinfo/discuss
