Danke Dir, wir hatten gestern ein ordentliches Testmesh ~6 Geräte am Laufen, aber Doku über Wertebereiche, oder Verhalten bei bestimmten Schalterwerten ist rar. M
Sent on the go ... > On 02.05.2016, at 21:26, Christoph Loesch <[email protected]> wrote: > > hi, > >> Am 02.05.2016 um 21:10 schrieb Matthias Šubik: >> Hello, >> hier ist die Frage nach den Konfigurationsoptionen von olsrv2 aufgetaucht. >> Gibt es hierzu mehr als “use the source luke” ? >> Oder wo ist die primäre Doku (repo wurde bereits durchsucht). > > http://www.olsr.org/mediawiki/index.php/Olsrd2#olsrd2 > > olsrd2 can be run both with and without a configuration file. In many cases > the configuration file should not be necessary at all. > In a typical mesh you might just run olsrd2 without special parameters and > configuration files, just by adding the mesh interfaces as parameters: > >> ./olsrd2_static wlan0 wlan1 lo > > You just need to set your "main/node IP" on the loopback interface. Set > linklocal IPs on the mesh interfaces and everything should work. You also can > set NO IPv4 addresses on the mesh interfaces, OLSRd2 will generate IPv4 > linklocal IPs automatically. > > >> Am 08.03.2016 um 23:15 schrieb Bernhard Marker: >> Hi, >> >> Kleiner Schritt mit OLSRv2 (IPv6 only / weil v4 weiterhin derzeit >> aktiviert bleiben soll mim alten daemon), den ich euch mitteilen will.... >> >> /etc/olsrd2/olsrd2.conf > > [global] > fork yes > [http] > acl default_accept > bindto 0.0.0.0 > port 1980 > webserver /etc/olsrd2/www > [telnet] > acl default_accept > bindto 0.0.0.0 > [remotecontrol] > acl default_accept > [log] > debug main > [olsrv2] > originator -0.0.0.0/0 > originator -::1/128 > originator default_accept > [interface=br0] > bindto -0.0.0.0/0 > bindto -::1/128 > bindto default_accept > >> Am 08.03.2016 um 23:15 schrieb Bernhard Marker: >> hab das olsrd2 binary im /home/ubnt zum testen manuell gestartet…. >> olsrd2_static-mipsel.bin -l /etc/olsrd2/olsrd2.conf >> >> läuft :D > > für das openwrt paket hab ich mal eine config gesehen die etwas anders > ausgesehen hat, mit olsrd2 unter openwrt habe ich bisher noch keine erfahrung. > > lg christoph > > >> >> bG >> M >> >>> On 02.05.2016, at 19:50, Paul Fuxjaeger <[email protected]> wrote: >>> >>> >>>> On 02 May 2016, at 10:07, Wolfgang Nagele <[email protected]> wrote: >>>> >>>> Hallo alle, >>>> >>>> Heute ist wieder Arbeitstreffen im Metalab. Freue mich auf euch! :) >>> >>> Clemens und ich sind heute nicht im Lab sondern als remote agents im >>> Einsatz: >>> >>> BattlemeshV9 in Porto >>> >>> Links zum Mitverfolgen: >>> https://twitter.com/search?q=battlemesh&src=savs >>> https://www.youtube.com/channel/UCNZfMF6AQoPvRL1Nc1kol5g >>> >>> Hier noch sind bis Samstag. Knapp unter 100 Teilnehmer diesmal. >>> Ninux (Rom) beginnt scheinbar auch gerade olsrd2 Netz aufzubauen. >>> >>> Was waren die wichtigsten offenen Fragen? (um sie zb Henning direkt stellen >>> zu können) >>> >>> >>> -- >>> Discuss mailing list >>> [email protected] >>> https://lists.funkfeuer.at/mailman/listinfo/discuss >> >> -- Discuss mailing list [email protected] https://lists.funkfeuer.at/mailman/listinfo/discuss
