Hi Saso, Please see reply within email. > prtpicl should display correctly details to resource addressing, cause > > slots are assigned. > > Attached, both the short and verbose version. > I will check that.
> >> ..."The problem appears to be that Illumos doesn't recognize any PCI > > bridges beyond those attached to CPU1. > > > > yes, maybe its a PCIe-PCI bridging issue, even i doubt. try kdb debug > > state... > > ::bp pcieb`pcieb_attach > > :c > > pcieb`pcieb_dbg_print/W 0x1 --- this should display basic > > debugged information > > :c > > Compiled a debug version of the pcieb module and attached the output > from this. Strangely enough, the output stopped for considerable time > between lines 21 and 22 in the output, so between lines: > > pcieb(0): pwrINITCHILD: config regs setup for pci15d9,690@0 > > and > > pcieb(1): pwrpcieb_pwr_disable: disabling PM > after which lots of output proceeded quickly. Could it be that the > probing code is getting stuck on and then giving up on probing a bridge > here? > I don't know what system is doing.. if its PSM probing issue, could you check it following option edited/entered in file /etc/system and reboot. set apix_enable = 0x0 > > also. try with disabled (both) MSI and workaround patch to 41210/chipset > > individually. > > pcieb`pcieb_enable_msi/W 0x1 > > pcieb_disable_41210_wkarnd/W 0x1 > > Neither setting changed anything. > sorry, my typing error. it should have been zero not one; pcieb`pcieb_enable_msi/W 0x0 > i'm not sure if there is any resource conflict issue; mdb -k | > ::interrupts > > as obviously, h/w is remote! > > Here's the output of that: > > # echo ::interrupts | mdb -k > CPU/Vect IRQ IPL Bus Trg Type Share APIC/INT# ISR > 1/0x20 9 9 PCI Lvl Fixed 1 0x0/0x9 acpi_wrapper_isr > 2/0x20 11 14 PCI Lvl Fixed 1 0x0/0xb hpet_isr > 3/0x20 - 7 PCI Edg MSI 1 - pcieb_intr_handler > 4/0x20 - 5 PCI Edg MSI-X 1 - mrsas_isr > 7/0x20 1 5 ISA Edg Fixed 1 0x0/0x1 i8042_intr > 8/0x20 12 5 ISA Edg Fixed 1 0x0/0xc i8042_intr > 8/0x22 - 5 PCI Edg MSI 1 - mpt_intr > 12/0x20 3 12 ISA Edg Fixed 1 0x0/0x3 asyintr > 13/0x20 - 4 PCI Edg MSI 1 - pcieb_intr_handler > 14/0x20 - 7 PCI Edg MSI 1 - pcieb_intr_handler > 15/0x20 - 4 PCI Edg MSI 1 - pcieb_intr_handler > 16/0x20 - 7 PCI Edg MSI 1 - pcieb_intr_handler > 17/0x20 - 4 PCI Edg MSI 1 - pcieb_intr_handler > 18/0x20 16 9 PCI Lvl Fixed 1 0x0/0x10 ehci_intr > 19/0x20 23 9 PCI Lvl Fixed 1 0x0/0x17 ehci_intr > 20/0x20 - 6 PCI Edg MSI-X 1 - igb_intr_tx_other > 21/0x20 - 6 PCI Edg MSI-X 1 - igb_intr_rx > all/0xf0 - 15 - Edg IPI 1 - xc_serv > all/0xf1 - 11 - Edg IPI 0 - poke_cpu > all/0xf2 - 14 - Edg IPI 1 - kcpc_hw_overflow_intr > all/0xf3 - 15 - Edg IPI 1 - apic_error_intr > all/0xf4 - 2 - Edg IPI 1 - cmi_cmci_trap > all/0xf5 - 14 - Edg IPI 1 - cbe_fire > all/0xf6 - 14 - Edg IPI 1 - cbe_fire > > Hope this provides more insight. If it helps, I can arrange for direct > access to the machine (both to the OS and the BMC). > handlers look ok here... let see if things workout with basic options, else would require access to h/w. Cheers, > Cheers, > -- > Saso > ------------------------------------------- illumos-discuss Archives: https://www.listbox.com/member/archive/182180/=now RSS Feed: https://www.listbox.com/member/archive/rss/182180/21175430-2e6923be Modify Your Subscription: https://www.listbox.com/member/?member_id=21175430&id_secret=21175430-6a77cda4 Powered by Listbox: http://www.listbox.com
