In my case the SATA disks aren’t on the 1068E. -brian
> On Jan 12, 2016, at 11:19 PM, John Barfield <[email protected]> wrote: > > BTW I left off that it has the same LSI controller chipset > > Sent from Outlook Mobile <https://aka.ms/qtex0l> > _____________________________ > From: John Barfield <[email protected]> > Sent: Tuesday, January 12, 2016 10:17 PM > Subject: Re: [OmniOS-discuss] [discuss] COMSTAR hanging > To: <[email protected]>, omnios-discuss > <[email protected]> > > > My input may or may not be valid but Im going to throw it out there anyway :) > > do you have any Mpt disconnect errors in /var/adm/messages? > > Also do you have smartmontools installed? > > I ran into similiar issues just booting a sunfire x4540 recently off of > OmniOS live, i/o would just hang while probing device nodes. > > I found the drive that was acting up and pulled it. > > All of a sudden everything miraculously worked amazing. > > I compiled smartmontools after I got it to boot and found 10 drives out of 48 > with bad sectors in prefail state. > > I dont know if this happens with SAS drives or not but Im using SATA and saw > this was a common issue in old opensolaris threads. > > -barfield > > Sent from Outlook Mobile <https://aka.ms/qtex0l> > > > > On Tue, Jan 12, 2016 at 8:08 PM -0800, "Brian Hechinger" <[email protected] > <mailto:[email protected]>> wrote: > > In the meantime I’ve removed the SLOG and L2ARC just in case. I don’t think > that’s it though. At least will have some sort of data point to work with > here. :) > > -brian > > > On Jan 12, 2016, at 10:55 PM, Brian Hechinger <[email protected]> wrote: > > > > Ok, it has happened. > > > > Checking this here, the pool seems to be fine. I can read and write files. > > > > except ‘zpool status’ is now currently hanging. I can still read/write from > > the pool, however. > > > > I can telnet to port 3260, but restarting target services has hung. > > > > root@basket1:/tank/Share# svcs -a | grep stmf > > online Jan_05 svc:/system/stmf:default > > root@basket1:/tank/Share# svcs -a | grep target > > disabled Jan_05 svc:/system/fcoe_target:default > > online Jan_05 svc:/network/iscsi/target:default > > online Jan_05 svc:/system/ibsrp/target:default > > root@basket1:/tank/Share# svcadm restart /system/ibsrp/target > > root@basket1:/tank/Share# svcadm restart /network/iscsi/target > > root@basket1:/tank/Share# svcadm restart /system/stmf > > root@basket1:/tank/Share# svcs -a | grep target > > disabled Jan_05 svc:/system/fcoe_target:default > > online* 22:43:03 svc:/system/ibsrp/target:default > > online* 22:43:13 svc:/network/iscsi/target:default > > root@basket1:/tank/Share# svcs -a | grep stmf > > online* 22:43:18 svc:/system/stmf:default > > root@basket1:/tank/Share# > > > > I’m doing a crash dump reboot. I’ll post the output somewhere. > > > > The output of echo '$<threadlist' | mdb -k is attached. > > > > <threadlist.out> > > > >> On Jan 8, 2016, at 3:11 PM, Matej Zerovnik <[email protected]> wrote: > >> > >> Is the pool usable during comstar hang? > >> Can you write and read from the pool (test both, in my case, when pool > >> froze, I wasn’t able to write to the pool, but I could read). > >> > >> Again, this might not be connected with Comstar, but in my case, Comstar > >> and pool hang were exchanging. > >> > >> Matej > >> > >>> On 08 Jan 2016, at 20:11, Brian Hechinger <[email protected]> wrote: > >>> > >>> Yeah, I’m using the 1068E to boot from (this has been supported since > >>> before Illumos) but that doesn’t have anything accessed by COMSTAR. > >>> > >>> It’s the ICH10R SATA that hosts the disks that COMSTAR shares out space > >>> from. > >>> > >>> -brian > >>> > >>>> On Jan 8, 2016, at 1:31 PM, Richard Jahnel <[email protected]> > >>>> wrote: > >>>> > >>>> First off, love SuperMicro good choice IMHO. > >>>> > >>>> This board has two on board controllers. > >>>> > >>>> LSI SAS1068E (not 100% sure there are working illumos drivers for this > >>>> one) > >>>> > >>>> And > >>>> > >>>> Intel ICH10R SATA (So I'm guessing your using this one.) > >>>> > >>>> -----Original Message----- > >>>> From: OmniOS-discuss [ mailto:[email protected] > >>>> <mailto:[email protected]>] On Behalf Of Brian > >>>> Hechinger > >>>> Sent: Friday, January 08, 2016 12:16 PM > >>>> To: Matej Zerovnik <[email protected]> > >>>> Cc: omnios-discuss <[email protected]> > >>>> Subject: Re: [OmniOS-discuss] [discuss] COMSTAR hanging > >>>> > >>>> > >>>>> Which controller exactly do you have? > >>>> > >>>> Whatever ACHI stuff is built into the motherboard. Motherboard is > >>>> X8DTL-3F. > >>>> > >>>>> Do you know firmware version? > >>>> > >>>> I’m assuming this is linked to the BIOS version? > >>>> > >>>>> Which hard drives? > >>>> > >>>> Hitachi-HUA723030ALA640-MKAOAA50-2.73TB > >>>> > >>>>> It might not tell much, but it’s good to have as much information as > >>>>> possible. > >>>>> > >>>>> When comstar hangs, can you telnet to the iSCSI port? > >>>>> What does svcs says, is the service running? > >>>>> What happens in you try to restart it? > >>>>> How do you restart it? > >>>> > >>>> I’ll try all these things next time. > >>>> > >>>>> In my case, svcs reported service running, but when I tried to telnet, > >>>>> there was no connection as well as there was no listening port opened > >>>>> when checking with 'netstat -an'. If I tried to restart target and stmf > >>>>> service, but stmf service got stucked in online* state and would not > >>>>> start. Reboot was the only solution in my case, but as I said, latest > >>>>> 014 release is working OK (but then again, load got reduced). > >>>> > >>>> All good info. Thanks! > >>>> > >>>> -brian > >>>> > >>>>> > >>>>> Matej > >>>>> > >>>>>> On 08 Jan 2016, at 17:50, Dave Pooser <[email protected]> wrote: > >>>>>> > >>>>>>>> On Jan 8, 2016, at 11:22 AM, Brian Hechinger <[email protected]> > >>>>>>>> wrote: > >>>>>>>> > >>>>>>>> No, ZFS raid10 > >>>>>>> > >>>>>>> Saw the HW-RAID term, and got concerned. That's what, raidz2 in > >>>>>>> ZFS-ese? > >>>>>> > >>>>>> It's a zpool with multiple mirror vdevs. > >>>>>> > >>>>>> -- > >>>>>> Dave Pooser > >>>>>> Cat-Herder-in-Chief, Pooserville.com > >>>>>> > >>>>>> > >>>>>> _______________________________________________ > >>>>>> OmniOS-discuss mailing list > >>>>>> [email protected] > >>>>>> http://lists.omniti.com/mailman/listinfo/omnios-discuss > >>>>>> <http://lists.omniti.com/mailman/listinfo/omnios-discuss> > >>>>> > >>>>> _______________________________________________ > >>>>> OmniOS-discuss mailing list > >>>>> [email protected] > >>>>> http://lists.omniti.com/mailman/listinfo/omnios-discuss > >>>>> <http://lists.omniti.com/mailman/listinfo/omnios-discuss> > >>>> > >>>> _______________________________________________ > >>>> OmniOS-discuss mailing list > >>>> [email protected] > >>>> http://lists.omniti.com/mailman/listinfo/omnios-discuss > >>>> <http://lists.omniti.com/mailman/listinfo/omnios-discuss> > >>> > >> > > > > > > http://www.listbox.com <http://www.listbox.com/> > illumos-discuss | Archives > <https://www.listbox.com/member/archive/182180/=now> > <https://www.listbox.com/member/archive/rss/182180/26677440-40b316d8> | > Modify <https://www.listbox.com/member/?&;> Your Subscription > <http://www.listbox.com/> > > _______________________________________________ > OmniOS-discuss mailing list > [email protected] > http://lists.omniti.com/mailman/listinfo/omnios-discuss ------------------------------------------- illumos-discuss Archives: https://www.listbox.com/member/archive/182180/=now RSS Feed: https://www.listbox.com/member/archive/rss/182180/21175430-2e6923be Modify Your Subscription: https://www.listbox.com/member/?member_id=21175430&id_secret=21175430-6a77cda4 Powered by Listbox: http://www.listbox.com
