My remaining S10_u8 system has developed an issue which is a bit hard for me to understand.
System is setup as follows: cxdxs0 - 3 way mirror rpool cxdxs1 - 3 disk RAIDZ1 pool c5d0s0 - single disk pool A couple of months ago I developed faults on rpool. I reseated all the connectors, ran scrubs of all file systems. Did a clear of the reported checksum errors and reran the scrubs. Everything seemed fine. Repeated the scrubs sometime later. Still fine. Recently I decided to mirror c5d0s0 and got another disk. In preparation I started a scrub on rpool. Unlike normal behavior it did not return, but seemed to hang. On looking more closely I saw that the vdevs for rpool and the RAIDZ1 pool showed the same vdev twice. "format -e" only shows 3 disks rather than the 4 which are installed. The BIOS sees all the drives properly. I've powered down the system until I can figure out a sensible strategy, but am somewhat short of ideas. Naturally, my last backup is a bit stale, though not seriously old. The recent work is in a small filesystem, so I can copy everything to the single disk pool pretty quickly. Suggestions? I could find no errors in messages. So I'm quite baffled how this could happen. Reg ------------------------------------------- illumos-discuss Archives: https://www.listbox.com/member/archive/182180/=now RSS Feed: https://www.listbox.com/member/archive/rss/182180/21175430-2e6923be Modify Your Subscription: https://www.listbox.com/member/?member_id=21175430&id_secret=21175430-6a77cda4 Powered by Listbox: http://www.listbox.com
