I don't have labelclear on illumos, not my version at least... But I read that " zpool create -f tank $disk & zpool destroy tank" may do the trick? https://www.illumos.org/issues/1789 I'll check the zpool.cache too : is it safe to be removed anytime? ---------------------------------------------------------------------------------------- Sonicle S.r.l. : http://www.sonicle.com Music: http://www.gabrielebulfon.com Quantum Mechanics : http://www.cdbaby.com/cd/gabrielebulfon ---------------------------------------------------------------------------------- Da: Attila Fülöp A: [email protected] Data: 1 aprile 2016 22.48.57 CEST Oggetto: Re: [discuss] converting adpatec volume to jbod cannot replace On 04/01/2016 06:44 PM, Gabriele Bulfon wrote: The proptotype machine is safe, I can play with it as much as I like, until I find a good solution for the target machine. I did the "dd if=/dev/zero of=/dev/....", did the fdisk remove/create partition...no way :( Only if I change the disk phisically in between the volume2jbod, the it will work. How can this be? Any other way to let it think it's another disk and forget about the replacing one? ZFS labels are quite "sticky". IRC each vdev has 4 labels, two at the start and two at the end. The easiest way to clear them is: # zpool labelclear Be sure to clear the labels on the unused device only. And maybe a # rm /etc/zfs/zpool.cache would also help. Attila
------------------------------------------- illumos-discuss Archives: https://www.listbox.com/member/archive/182180/=now RSS Feed: https://www.listbox.com/member/archive/rss/182180/21175430-2e6923be Modify Your Subscription: https://www.listbox.com/member/?member_id=21175430&id_secret=21175430-6a77cda4 Powered by Listbox: http://www.listbox.com
