Digging a bit deeper.

It is showing up in 'prtconf -Dd' in OmniOS:

        pci1022,1483 (pciex1022,1483) [Advanced Micro Devices, Inc. [AMD]
Starship/Matisse GPP Bridge], instance #17 (driver name: pcieb)
            pci1000,3180 (pciex1000,c9) [Broadcom / LSI SAS3216 PCI-Express
Fusion-MPT SAS-3] (driver name: mpt_sas)

Disks are not being discovered.

In the system log:

May 11 14:03:46 localhost scsi: [ID 365881 kern.info] /pci@6f
,0/pci1022,1483@1,1/pci1000,3180@0 (mpt_sas0):#012#011mptsas0 supports
power management.
May 11 14:03:46 localhost scsi: [ID 365881 kern.info] /pci@6f
,0/pci1022,1483@1,1/pci1000,3180@0 (mpt_sas0):#012#011mptsas0 supports
power management.
May 11 14:03:46 localhost scsi: [ID 107833 kern.warning] WARNING: /pci@6f
,0/pci1022,1483@1,1/pci1000,3180@0 (mpt_sas0):#012#011mptsas bad flash
signature
May 11 14:03:46 localhost scsi: [ID 107833 kern.warning] WARNING: /pci@6f
,0/pci1022,1483@1,1/pci1000,3180@0 (mpt_sas0):#012#011mptsas chip
initialization
 failed
May 11 14:03:46 localhost scsi: [ID 107833 kern.warning] WARNING: /pci@6f
,0/pci1022,1483@1,1/pci1000,3180@0 (mpt_sas0):#012#011attach failed
May 11 14:03:46 localhost scsi: [ID 365881 kern.info] /pci@6f
,0/pci1022,1483@1,1/pci1000,3180@0 (mpt_sas0):#012#011mptsas0 supports
power management.
May 11 14:03:46 localhost scsi: [ID 365881 kern.info] /pci@6f
,0/pci1022,1483@1,1/pci1000,3180@0 (mpt_sas0):#012#011mptsas0 supports
power management.
May 11 14:03:46 localhost scsi: [ID 107833 kern.warning] WARNING: /pci@6f
,0/pci1022,1483@1,1/pci1000,3180@0 (mpt_sas0):#012#011mptsas bad flash
signature
May 11 14:03:46 localhost scsi: [ID 107833 kern.warning] WARNING: /pci@6f
,0/pci1022,1483@1,1/pci1000,3180@0 (mpt_sas0):#012#011mptsas chip
initialization
 failed
May 11 14:03:46 localhost scsi: [ID 107833 kern.warning] WARNING: /pci@6f
,0/pci1022,1483@1,1/pci1000,3180@0 (mpt_sas0):#012#011attach failed
May 11 14:03:46 localhost fmd: [ID 377184 daemon.error] SUNW-MSG-ID:
PCIEX-8000-0A, TYPE: Fault, VER: 1, SEVERITY: Critical#012EVENT-TIME: Tue
May 11 09:
03:45 CDT 2021#012PLATFORM: AS--1114S-WN10RT, CSN: S407507X1210260,
HOSTNAME: mir-zfs06#012SOURCE: eft, REV: 1.16#012EVENT-ID:
792045f1-b22c-42b2-a835-c5
08757005c1#012DESC: A problem was detected for a PCIEX device.#012  Refer
to http://illumos.org/msg/PCIEX-8000-0A for more
information.#012AUTO-RESPONSE:
 One or more device instances may be disabled#012#012IMPACT: Loss of
services provided by the device instances associated with this
fault#012#012REC-ACTI
ON: Schedule a repair procedure to replace the affected device.  Use fmadm
faulty to identify the device or contact your illumos distribution team for
su
pport.#012
May 11 14:03:47 localhost ahci: [ID 432157 kern.warning] WARNING: ahci2:
Cannot allocate ports structure
May 11 14:03:47 localhost scsi: [ID 365881 kern.info] /pci@6f
,0/pci1022,1483@1,1/pci1000,3180@0 (mpt_sas0):#012#011mptsas0 supports
power management.
May 11 14:03:47 localhost scsi: [ID 365881 kern.info] /pci@6f
,0/pci1022,1483@1,1/pci1000,3180@0 (mpt_sas0):#012#011mptsas0 supports
power management.
May 11 14:03:47 localhost scsi: [ID 107833 kern.warning] WARNING: /pci@6f
,0/pci1022,1483@1,1/pci1000,3180@0 (mpt_sas0):#012#011mptsas bad flash
signature
May 11 14:03:47 localhost scsi: [ID 107833 kern.warning] WARNING: /pci@6f
,0/pci1022,1483@1,1/pci1000,3180@0 (mpt_sas0):#012#011mptsas chip
initialization
 failed
May 11 14:03:47 localhost scsi: [ID 107833 kern.warning] WARNING: /pci@6f
,0/pci1022,1483@1,1/pci1000,3180@0 (mpt_sas0):#012#011attach failed
May 11 14:03:47 localhost scsi: [ID 365881 kern.info] /pci@6f
,0/pci1022,1483@1,1/pci1000,3180@0 (mpt_sas0):#012#011mptsas0 supports
power management.
May 11 14:03:47 localhost scsi: [ID 365881 kern.info] /pci@6f
,0/pci1022,1483@1,1/pci1000,3180@0 (mpt_sas0):#012#011mptsas0 supports
power management.
May 11 14:03:47 localhost scsi: [ID 107833 kern.warning] WARNING: /pci@6f
,0/pci1022,1483@1,1/pci1000,3180@0 (mpt_sas0):#012#011mptsas bad flash
signature
May 11 14:03:47 localhost scsi: [ID 107833 kern.warning] WARNING: /pci@6f
,0/pci1022,1483@1,1/pci1000,3180@0 (mpt_sas0):#012#011mptsas chip
initialization
 failed
May 11 14:03:47 localhost scsi: [ID 107833 kern.warning] WARNING: /pci@6f
,0/pci1022,1483@1,1/pci1000,3180@0 (mpt_sas0):#012#011attach failed
May 11 14:03:47 localhost scsi: [ID 365881 kern.info] /pci@6f
,0/pci1022,1483@1,1/pci1000,3180@0 (mpt_sas0):#012#011mptsas0 supports
power management.
May 11 14:03:47 localhost scsi: [ID 365881 kern.info] /pci@6f
,0/pci1022,1483@1,1/pci1000,3180@0 (mpt_sas0):#012#011mptsas0 supports
power management.
May 11 14:03:47 localhost scsi: [ID 107833 kern.warning] WARNING: /pci@6f
,0/pci1022,1483@1,1/pci1000,3180@0 (mpt_sas0):#012#011mptsas bad flash
signature
May 11 14:03:47 localhost scsi: [ID 107833 kern.warning] WARNING: /pci@6f
,0/pci1022,1483@1,1/pci1000,3180@0 (mpt_sas0):#012#011mptsas chip
initialization
 failed
May 11 14:03:47 localhost scsi: [ID 107833 kern.warning] WARNING: /pci@6f
,0/pci1022,1483@1,1/pci1000,3180@0 (mpt_sas0):#012#011attach failed




On Tue, May 11, 2021 at 3:27 PM Schweiss, Chip <[email protected]> wrote:

> I have a new 9306-16e that is not showing up in OmniOS r151038.   It is
> working fine when booting to CentOS 7.   It is not even listed in lspci on
> OmniOS.   These HBAs were added quite some time ago.  The ID doesn't seem
> to have changed (1000:c9).
>
> I upgraded the firmware to version 16 before installing OmniOS.
>
> Any help on getting this HBA working under OmniOS would be appreciated.
>
> Thanks,
> -Chip
>
> From CentOS 7 'lspci -vvv -nn':
>
> 81:00.0 Serial Attached SCSI controller [0107]: Broadcom / LSI SAS3216
> PCI-Express Fusion-MPT SAS-3 [1000:00c9] (rev 01)
>         Subsystem: Broadcom / LSI Device [1000:3180]
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx+
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0, Cache Line Size: 64 bytes
>         Interrupt: pin A routed to IRQ 551
>         NUMA node: 0
>         Region 0: I/O ports at b000 [size=256]
>         Region 1: Memory at f0100000 (64-bit, non-prefetchable) [size=64K]
>         Expansion ROM at f0000000 [disabled] [size=1M]
>         Capabilities: [50] Power Management version 3
>                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [68] Express (v2) Endpoint, MSI 00
>                 DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s
> <64ns, L1 <1us
>                         ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
> SlotPowerLimit 75.000W
>                 DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
> Unsupported-
>                         RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop+
> FLReset-
>                         MaxPayload 512 bytes, MaxReadReq 512 bytes
>                 DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr-
> TransPend-
>                 LnkCap: Port #0, Speed 8GT/s, Width x8, ASPM not
> supported, Exit Latency L0s <2us, L1 <4us
>                         ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
>                 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
>                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>                 LnkSta: Speed 8GT/s, Width x8, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
>                 DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-,
> OBFF Not Supported
>                 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-,
> LTR-, OBFF Disabled
>                 LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance-
> SpeedDis-
>                          Transmit Margin: Normal Operating Range,
> EnterModifiedCompliance- ComplianceSOS-
>                          Compliance De-emphasis: -6dB
>                 LnkSta2: Current De-emphasis Level: -3.5dB,
> EqualizationComplete+, EqualizationPhase1+
>                          EqualizationPhase2+, EqualizationPhase3+,
> LinkEqualizationRequest-
>         Capabilities: [a8] MSI: Enable- Count=1/1 Maskable+ 64bit+
>                 Address: 0000000000000000  Data: 0000
>                 Masking: 00000000  Pending: 00000000
>         Capabilities: [c0] MSI-X: Enable+ Count=96 Masked-
>                 Vector table: BAR=1 offset=0000e000
>                 PBA: BAR=1 offset=0000f000
>         Capabilities: [100 v2] Advanced Error Reporting
>                 UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>                 UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>                 UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>                 CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr-
>                 CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr+
>                 AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap-
> ChkEn-
>         Capabilities: [1e0 v1] #19
>         Capabilities: [1c0 v1] Power Budgeting <?>
>         Capabilities: [190 v1] #16
>         Capabilities: [148 v1] Alternative Routing-ID Interpretation (ARI)
>                 ARICap: MFVC- ACS-, Next Function: 0
>                 ARICtl: MFVC- ACS-, Function Group: 0
>         Kernel driver in use: mpt3sas
>         Kernel modules: mpt3sas
>

------------------------------------------
illumos: illumos-discuss
Permalink: 
https://illumos.topicbox.com/groups/discuss/T756e67b8a2254305-M563c951cfeb65eefa0f3dec5
Delivery options: https://illumos.topicbox.com/groups/discuss/subscription

Reply via email to