You could do it, I suppose with splitters on the RF side. However, each splitter will reduce the RF power (i.e. a 3-way splitter will give each antenna only 0.33 of the power that the original put out (unless you use amplified splitters, and those usually don't go two-way - remember, you need bidirectional). Also, most RF cabling (unless you want REALLY BIG or REALLY EXPENSIVE cable) is fairly lossy. You probably wouldn't get too much signal at your antennas, or return signal back at the AP. In short, not a good idea.
If you want to manage all the AP's as a single "AP", then look at something like Airespace or Aruba, but be warned, these are enterprise, not home units (i.e. will cost serious money). -- corwin _______________________________________________ Discuss mailing list Discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss