Hello, I am having a problem with selecting audio devices with squeezeslave. It's not a squeezeslave problem but more of a Windows 7 HDMI audio connection problem.
My HDMI connection is plugged into an Onkyo receiver. When the receiver is on the HDMI audio shows up in Windows 7 playback devices, when it is turned off it disappears. This changes the audio configuration that SqueezeSlave looks at when you do the -L command. Receiver Off: squeezeslave-1.0-227.exe -L Output devices: * 4: (Windows DirectSound) Primary Sound Driver (0/0) 5: (Windows DirectSound) Speakers (C-Media USB Headphone Set ) (0/0) 6: (Windows DirectSound) Speakers (Realtek High Definition Audio) (0/0) 7: (Windows DirectSound) Realtek Digital Output (Realtek High Definition Audio) (0/0) Receiver On: squeezeslave-1.0-227.exe -L Output devices: * 4: (Windows DirectSound) Primary Sound Driver (0/0) 5: (Windows DirectSound) TX-NR807 (Intel(R) Display Audio) (0/0) 6: (Windows DirectSound) Speakers (C-Media USB Headphone Set ) (0/0) 7: (Windows DirectSound) Speakers (Realtek High Definition Audio) (0/0) 8: (Windows DirectSound) Realtek Digital Output (Realtek High Definition Audio) (0/0) The HDMI audio needs to be set as the primary audio for running the HTPC output to the receiver. Is there a way to associate the output device to a name instead of ID# or is it possible to lock the ID# once it's activated? It currently changes even when there is an active session. squeezeslave-1.0-227.exe -D -o6 -m00:00:00:00:00:01 Thanks, -KT -- Knightro ------------------------------------------------------------------------ Knightro's Profile: http://forums.slimdevices.com/member.php?userid=41288 View this thread: http://forums.slimdevices.com/showthread.php?t=87515 _______________________________________________ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
