And new years comming up .. :-( Can anyone point me to the error.. im going blind :cool:
15420154211542215423Gingernut63 wrote: > > > Guees its the LMS media folder setting... i just did copy paste as > writen in the user guide .... > > MonkeySqueeze will not show as a player in LMS. The only way you know > it's working correctly is when the tracks load the same as MediaMonkey. > I can't view your attached images so I cant see your settings, however > your symptoms indicate that the communications between MM and the NAS > aren't working and are not setup correctly. > > Do the following: > 1. On the options page make sure the LMS IP address and HTTP port number > are correct. Go to the LMS web page > Settings > Information > LMS > Server Status to find the info. > 2. On the options page check the Primary Squeezebox Device MAC address. > Go to the LMS web page > Settings > Information, find the device and > compare the address making sure you use the same case. (Make sure the > device is on and linked to the server) > 3. On the options page under LMS on a Linux or Windows Server/NAS, > deselect/uncheck LMS is prior to v7.5.1 > 4. On the options page under LMS on a Linux or Windows Server/NAS you > can use the network address or a mapped address for the MediaMonkey > Music Folder > 5. On the options page under LMS on a Linux or Windows Server/NAS make > sure the LMS Media Folder uses forward slashes (/). > 6. On the options page under LMS on a Linux or Windows Server/NAS make > sure the addresses are the same case as the source. Using a lower case > when it should be upper case or vice versa can cause communication > problems. > 7. Press the red MonkeySqueeze button in MediaMonkey to enable > communications. Should be turquoise when on. > > To test the communications play some music on your main Squeezebox > device. In MediaMonkey load/place different music in the Now > Playing/Playlist window, select play and then enable MonkeySqueeze. The > music playing on the SB device will stop and be replaced by the music in > MediaMonkey :). If the music stops on the device but is not replaced by > the MediaMonkey music then your comms are working but there is an error > with one of the parameters :-?. If the music continues to play on the > device then the comms are not working at all :(. > > Let me know how you get on. > > Gingernut63 > > P.S. I haven't tried MonkeySqueeze with LMS 7.8 but it should > work.....?? +-------------------------------------------------------------------+ |Filename: 011.jpg | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=15423| +-------------------------------------------------------------------+ ------------------------------------------------------------------------ tordenfod's Profile: http://forums.slimdevices.com/member.php?userid=21531 View this thread: http://forums.slimdevices.com/showthread.php?t=89046 _______________________________________________ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
