On 5-May-06, at 2:38 PM, Bart wrote:
kdf Wrote:
Is that measuring with or without the squeezebox connected? -k
Without it connected - when I measure it with the squeezebox connected
it does, indeed, drop by .6v
Would this be enough to stop it working?
it would seem from your results thus far, that it is.
If I could find a 6v power supply rated at about 1.5 - 2A would it be
safe to use it?
unfortunately, I can't say anything for certain on that either. I
don't know what the upper limits are on the supply voltage. Likely
sean has posted this elsewhere before, but you could also try asking on
the diy forum. My guess is that forum is just for problems like this.
As a general rule, being over by only 400mV 'should' be safe, but it is
best still to give a bit of time for the right person to answer rather
than risk your squeezebox against the possibility of intolerant
components.
-k
_______________________________________________
discuss mailing list
discuss@lists.slimdevices.com
http://lists.slimdevices.com/lists/listinfo/discuss
