No, this looks OK to me. I don't know why you are having trouble.
On Tue, Aug 28, 2012 at 12:15:04PM +0200, Oswald, Thomas wrote: > in syslog I see this messages: > > Aug 28 12:14:04 autolab8 ovs-vsctl: 00001|vsctl|INFO|Called as ovs-vsctl > add-port br100 eth3 > Aug 28 12:14:04 autolab8 kernel: [ 2308.962045] device eth3 entered > promiscuous mode > Aug 28 12:14:04 autolab8 ovs-vsctl: 00001|vsctl|INFO|Called as ovs-vsctl -- > set Bridge br100 mirrors=@m -- --id=@bond0 get Port bond0 -- --id=@eth3 get > Port eth3 -- --id=@m create Mirror name=mymirror select-dst-port=@bond0 > select-src-port=@bond0 output-port=@eth3 > > On a vm I execute a ping to a remote router-ip (outside the host). On the > correspondig vnet0 I get a dump with tcpdump. Also on eth1 and eth2 that are > members of bond0 > > # ovs-vsctl show > d1c0be94-786d-452e-bcbf-a294edfdddea > Bridge "br100" > Port "eth3" > Interface "eth3" > Port "bond0" > trunks: [3000, 3001, 3002, 3003] > Interface "eth2" > Interface "eth1" > Port "vnet0" > tag: 3001 > Interface "vnet0" > Port "br3001" > tag: 3001 > Interface "br3001" > type: internal > Port "br100" > Interface "br100" > type: internal > ovs_version: "1.4.0+build0" > > > # ovs-appctl bond/list > bond type slaves > bond0 stable eth1, eth2 > > do you see anything that is strange? > > > > -----Ursprüngliche Nachricht----- > Von: Ben Pfaff [mailto:[email protected]] > Gesendet: Montag, 27. August 2012 02:06 > An: Oswald, Thomas > Cc: [email protected] > Betreff: Re: [ovs-discuss] port mirror on bond0 > > On Fri, Aug 24, 2012 at 11:35:35AM +0200, Oswald, Thomas wrote: > > I have an issue with a port mirror. I bundled the interfaces eth1, eth2 in > > bond0. After that I want to see the network traffic on it. "tcpdump -i > > bond0" doesn't work. I configured a port mirror in the following way: > > > > ovs-vsctl add-port br100 eth3 > > > > ovs-vsctl -- set Bridge br100 mirrors=@m > > -- --id=@bond0 get Port bond0 > > -- --id=@eth3 get Port eth3 > > -- --id=@m create Mirror name=mymirror select-dst-port=@bond0 > > select-src-port=@bond0 output-port=@eth3 > > > > > > Now I'm a little bit confused because I assumed that all traffic ingress > > and egress on bond0 is mirrored to eth3 and I just have to tcpdump on that > > interface, but I see nothing. > > > > Any idea? > > Your configuration looks correct to me. Is there anything in the > ovs-vswitchd log about a configuration problem? _______________________________________________ discuss mailing list [email protected] http://openvswitch.org/mailman/listinfo/discuss
