Hi! Also, I just tried this:
ifdown ovsbr0p1 ifdown eth0 ovs-vsctl del-port ovsbr0p1 ovs-vsctl del-br ovsbr0 ovs-vsctl show (empty / clean) ovs-vsctl add-br br0 ovs-vsctl add-port br0 eth0 ovs-vsctl list-br New /etc/network/interfaces: ------ # The primary network interface auto eth0 iface eth0 inet static address 10.32.14.2 netmask 24 # gateway 10.32.14.1 auto br0 iface br0 inet manual up ifconfig $IFACE 0.0.0.0 up down ifconfig $IFACE down ------ And now I can select the bridge (br0) on virt-manager but, same error when I try to start it: "Unable to complete install: 'Unable to add bridge br0 port vnet0: Operation not supported'" I just read this: http://blog.allanglesit.com/2012/03/linux-kvm-ubuntu-12-04-with-openvswitch/- since I'm using Ubuntu 12.04 but, no difference, same error... I really appreciate ANY help from you guys! Thanks! Thiago On 18 January 2013 18:40, Martinx - ジェームズ <[email protected]> wrote: > Hi! > > I'm trying Open vSwitch after much delay... Can't use brctl anymore... > =P > > I have Ubuntu 12.04 64 bits, Open vSwitch 1.4.0+build0, with Ubuntu > Cloud Archives <https://wiki.ubuntu.com/ServerTeam/CloudArchive>repository > enabled... Which provides libvirt 0.9.13 for Ubuntu 12.04 LTS. > > What I'm doing? > > ovs-vsctl add-br ovsbr0 > ovs-vsctl add-port ovsbr0 eth0 > ovs-vsctl add-port ovsbr0 ovsbr0p1 -- set interface ovsbr0p1 type=internal > > My /etc/network/interfaces have: > --- > # The primary network interface > auto eth0 > iface eth0 inet manual > up ifconfig $IFACE 0.0.0.0 up > down ifconfig $IFACE down > > auto ovsbr0p1 > iface ovsbr0p1 inet static > address 10.32.14.2 > netmask 24 > --- > > But when open virt-manager, I can't select the ovsbr0p1 (or ovsbr0)... > They are "unselectable" (gray)... > > What am I missing? > > I followed this guide to help me: > http://blog.allanglesit.com/2012/10/linux-kvm-ubuntu-12-10-with-openvswitch/ > > When I tried to manually select the ovsbr0 or ovsbr0p1, virt-manager > returns: > > ------ > Traceback (most recent call last): > File “/usr/share/virt-manager/virtManager/asyncjob.py”, line 45, in > cb_wrapper > callback(asyncjob, *args, **kwargs) > File “/usr/share/virt-manager/virtManager/create.py”, line 1909, in > do_install > guest.start_install(False, meter=meter) > File “/usr/lib/python2.7/dist-packages/virtinst/Guest.py”, line 1236, in > start_install > noboot) > File “/usr/lib/python2.7/dist-packages/virtinst/Guest.py”, line 1304, in > _create_guest > dom = self.conn.createLinux(start_xml or final_xml, 0) > File “/usr/lib/python2.7/dist-packages/libvirt.py”, line 2501, in > createLinux > if ret is None:raise libvirtError(‘virDomainCreateLinux() failed’, > conn=self) > libvirtError: Unable to add bridge ovsbr0p1 port vnet0: Operation not > supported > ------ > > I do not have openvswitch-brcompat installed. And I don't think I need it. > > Thanks! > Thiago >
_______________________________________________ discuss mailing list [email protected] http://openvswitch.org/mailman/listinfo/discuss
