ok.., i ran ovs on my local machine ubuntu 12.04, with bridge br0 and eth0 port under that, after that i create one file name "file1" with some 10 flows, actually i want test the ovs with acl(access control list) rules, so i take some of their rules put it in ovs format as shown above,
after that i ran command sudo ./ovs-ofctl add-flows br0 file1 o/p: unknown keyword priority check with different format also like instead of priority i put in_port, dl_type still same problem. On Sat, Apr 27, 2013 at 11:41 AM, Justin Pettit <jpet...@nicira.com> wrote: > I can't reproduce any problem loading flows in the 1.9 release. The flows > you defined still won't match the nw_src and nw_dst, since you didn't > specify matching IP packets. Perhaps if you showed what you actually ran, > the contents of the file, and the output of the command, we might be able > to help you more. > > --Justin > > > On Apr 26, 2013, at 10:11 PM, Prashant Chougule <chougulepa...@gmail.com> > wrote: > > > same problem with these flows also , > > unknown keyword priority when ./ovs-ofctl add-flow br0 file > > > > 1 > priority=60008,in_port=1,idle_timeout=0,nw_src=81.110.124.109,nw_dst=249.145.51.3,actions=output:2 > > 2 > priority=60007,in_port=1,idle_timeout=0,nw_src=81.110.124.62,nw_dst=74.104.165.223,actions=output:2 > > 3 > priority=60006,in_port=1,idle_timeout=0,nw_src=81.110.124.43,nw_dst=249.145.51.3,actions=output:2 > > 4 > priority=60005,in_port=1,idle_timeout=0,nw_src=81.110.124.34,nw_dst=249.145.51.3,actions=output:2 > > 5 > priority=60004,in_port=1,idle_timeout=0,nw_src=81.110.124.13,nw_dst=45.128.3.166,actions=output:2 > > 6 > priority=60003,in_port=1,idle_timeout=0,nw_src=81.110.124.0,nw_dst=249.145.51.3,actions=output:2 > > 7 > priority=60002,in_port=1,idle_timeout=0,nw_src=82.129.237.14,nw_dst=249.142.21.146,actions=output:2 > > 8 > priority=60002,in_port=1,idle_timeout=0,nw_src=82.129.237.25,nw_dst=249.142.21.146,actions=output:2 > > 9 > priority=60001,in_port=1,idle_timeout=0,nw_src=82.129.237.58,nw_dst=249.142.21.146,actions=output:2 > > 10 > priority=60000,in_port=1,idle_timeout=0,nw_src=82.129.237.181,nw_dst=45.128.3.166,actions=output:2 > > > > above flows not working, do i need to add some masking to abve i am > using ovs-1.9.0 ? > > > > i try with other file with 10 flows like given one it, its working,it > showing me in table. > > > > > > priority=60000,idle_timeout=50000,dl_type=0x0806,nw_src=192.168.1.9,nw_dst=192.168.1.15,table=20,dl_dst=b8:70:f4:a > 8:a3:34,dl_src=e8:40:f2:3c:ad:93,nw_proto=1,actions=output:1 > > > > > > On Sat, Apr 27, 2013 at 10:09 AM, Justin Pettit <jpet...@nicira.com> > wrote: > > Most of the priority definitions don't look wrong, but here are a few > things: > > > > - You can't specify a priority over 65535 (I see a 65536 in > there), since it's expecting a 16-bit value. > > - Your dl_type won't work with your nw_src and nw_dst > definitions, since it's not an IP ethertype. > > - I'm not sure it's in your file, but you can't put numbers > before your flow definitions. > > - I'd use "ovs-ofctl add-flows <file>", since that's closer to > what you want to do. > > > > --Justin > > > > On Apr 26, 2013, at 8:45 PM, Prashant Chougule <chougulepa...@gmail.com> > wrote: > > > > > hi, > > > > > > I am trying to add file with 1000 rules, it will give me unknown > keyword priority as a error if push individual flow it is working, > > > some of the rules from the file > > > > > > > > > 1 > priority=65536,idle_timeout=50000,dl_type=0x060,in_port=ANY,nw_src=81.110.124.109,nw_dst=249.145.51.3,actions=output:2 > > > 2 > priority=60001,idle_timeout=50000,dl_type=0x060,in_port=ANY,nw_src=81.110.124.62,nw_dst=74.104.165.223,actions=output:2 > > > 3 > priority=60002,idle_timeout=50000,dl_type=0x060,in_port=ANY,nw_src=81.110.124.43,nw_dst=249.145.51.3,actions=output:2 > > > 4 > priority=60003,idle_timeout=50000,dl_type=0x060,in_port=ANY,nw_src=81.110.124.34,nw_dst=249.145.51.3,actions=output:2 > > > 5 > priority=60004,idle_timeout=50000,dl_type=0x060,in_port=ANY,nw_src=81.110.124.13,nw_dst=45.128.3.166,actions=output:2 > > > 6 > priority=60005,idle_timeout=50000,dl_type=0x060,in_port=ANY,nw_src=81.110.124.0,nw_dst=249.145.51.3,actions=output:2 > > > 7 > priority=60006,idle_timeout=50000,dl_type=0x060,in_port=ANY,nw_src=82.129.237.14,nw_dst=249.142.21.146,actions=output:2 > > > 8 > priority=60007,idle_timeout=50000,dl_type=0x060,in_port=ANY,nw_src=82.129.237.25,nw_dst=249.142.21.146,actions=output:2 > > > 9 > priority=60008,idle_timeout=50000,dl_type=0x060,in_port=ANY,nw_src=82.129.237.58,nw_dst=249.142.21.146,actions=output:2 > > > 10 > priority=60009,idle_timeout=50000,dl_type=0x060,in_port=ANY,nw_src=82.129.237.181,nw_dst=45.128.3.166,actions=output:2 > > > it is standard rule set i put it in openflow format, > > > try with ./ovs-ofctl add-flow br0 -<file it show me ovs-ofctl: unknown > keyword priority. is their any wrong in my syntax? > > > > > > -- > > > Thanks &Regards, > > > Prashant Chougule. > > > _______________________________________________ > > > discuss mailing list > > > discuss@openvswitch.org > > > http://openvswitch.org/mailman/listinfo/discuss > > > > > > > > > > -- > > Thanks &Regards, > > Prashant Chougule. > > -- Thanks &Regards, Prashant Chougule.
_______________________________________________ discuss mailing list discuss@openvswitch.org http://openvswitch.org/mailman/listinfo/discuss