Hi,
I am running 2 VMs through Virtual Machine manager and has OVS and POX
controller at the host. So, I tried the following commands:
/ovs-vsctl add-br br0//
//ovs-vsctl add-port br0 vnet0//
//ovs-vsctl add-port br0 vnet1//
//ifconfig vnet0 promisc up//
//ifconfig vnet1 promisc up//
//ovs-vsctl set-fail-mode br0 standalone//
//ovs-vsctl set-fail-mode br0 secure//
//ovs-vsctl set-controller br0 tcp:0.0.0.0:6633/
After this, I looked into OVS by using *ovs-vsctl show* and it returned
the following output:
7e431756-a6e0-4b66-84ae-935f0946abe3
Bridge "br0"
Controller "tcp:0.0.0.0:6633"
fail_mode: secure
Port "vnet1"
Interface "vnet1"
Port "br0"
Interface "br0"
type: internal
Port "vnet0"
Interface "vnet0"
But when I try to check the flows by using *ovs-ofctl dump-flows br0 *it
says:
ovs-ofctl: br0 is not a bridge or a socket
Why br0 is not a bridge now when ovs-vsctl show had showed it as a bridge?
Regards,
Asad
_______________________________________________
discuss mailing list
[email protected]
http://openvswitch.org/mailman/listinfo/discuss
