I think there's actually a userspace bug: http://openvswitch.org/pipermail/dev/2013-October/032532.html
On Mon, Oct 07, 2013 at 10:06:11AM -0700, Romain Lenglet wrote: > Please install the OVS kernel module that is of the same version as your > userspace OVS. > The format of userspace actions has changed in 1.11, so IPFIX sampling in OVS > 1.11 will not work with an openvswitch module earlier than 1.11. > Thanks, > -- > Romain Lenglet > > On Oct 2, 2013, at 11:45 PM, sonia verma <soniaverma9...@gmail.com> wrote: > > > Hi all.. > > > > The output of dmesg is as follows > > > > dmesg | grep ovs > > [ 0.000000] Linux version 3.5.7.17 (root@vvdnovs) (gcc version 4.6.3 > > (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #3 SMP Thu Sep 5 09:35:11 IST 2013 () > > [ 351.553616] device ovs-system entered promiscuous mode > > root@vvdnovs:~# > > root@vvdnovs:~# > > root@vvdnovs:~# dmesg | grep openvswitch > > [ 13.345922] openvswitch: Open vSwitch switching datapath > > > > The bridge is still not forwarding packets after enabling IPFIX.I am using > > Kernel version 3.5.7.17. > > > > Can you recommend me some specific kernel version which supports IPFIX. > > > > Thanks ... > > Sonia > > > > > > > > > > On Wed, Oct 2, 2013 at 10:16 PM, Ben Pfaff <b...@nicira.com> wrote: > > abhishek jain <ashujain9...@gmail.com> sent an almost identical question > > yesterday: > > http://openvswitch.org/pipermail/discuss/2013-October/011407.html > > I responded: > > http://openvswitch.org/pipermail/discuss/2013-October/011422.html > > > > > > On Tue, Oct 1, 2013 at 12:00 AM, sonia verma <soniaverma9...@gmail.com> > > wrote: > > Hi all.. > > > > > > I am trying IPFIX with OVS version 1.11. and not able to forward packets > > after enabling IPFIX on OVS.Following are the logs after enabling IPFIX on > > OVS.. > > > > > > 2013-10-01T05:37:25Z|00259|dpif|WARN|Dropped 37 log messages in last 148 > > seconds (most recently, 147 seconds ago) due to excessive rate > > > 2013-10-01T05:37:25Z|00260|dpif|WARN|system@ovs-system: failed to > > > put[modify][zero] (Numerical result out of range) > > > in_port(2),eth(src=e0:db:55:a0:e1:13,dst=00:27:13:b7:2f:74),eth_type(0x0800),ipv4(src=192.168.1.200/0.0.0.0,dst=192.168.1.54/0.0.0.0,proto=1/0,tos=0/0,ttl=128/0,frag=no/0xff),icmp(type=8/0,code=0/0), > > > packets:0, bytes:0, used:never, > > > actions:sample(sample=100.0%,actions(userspace(pid=4294962366,ipfix))),4 > > > 2013-10-01T05:37:25Z|00261|dpif|WARN|system@ovs-system: failed to > > > put[modify][zero] (Numerical result out of range) > > > in_port(4),eth(src=00:27:13:b7:2f:74,dst=e0:db:55:a0:e1:13),eth_type(0x0800),ipv4(src=192.168.1.54/0.0.0.0,dst=192.168.1.200/0.0.0.0,proto=1/0,tos=0/0,ttl=64/0,frag=no/0xff),icmp(type=0/0,code=0/0), > > > packets:0, bytes:0, used:never, > > > actions:sample(sample=100.0%,actions(userspace(pid=4294962363,ipfix))),2 > > > > > > WHAT DOES IT MEAN > > > > Thanks.. > > Sonia > > > > _______________________________________________ > > discuss mailing list > > discuss@openvswitch.org > > http://openvswitch.org/mailman/listinfo/discuss > > > > > > > > > > -- > > "I don't normally do acked-by's. I think it's my way of avoiding > > getting blamed when it all blows up." Andrew Morton > > > > _______________________________________________ > > discuss mailing list > > discuss@openvswitch.org > > http://openvswitch.org/mailman/listinfo/discuss _______________________________________________ discuss mailing list discuss@openvswitch.org http://openvswitch.org/mailman/listinfo/discuss