Thanks Justin, this worked fine!
On Thursday, January 9, 2014 2:46 PM, Justin Pettit <[email protected]> wrote: Are you trying to get this information on a different system than where OVS is running? If so, you need to tell your OVS to listen for an OpenFlow connection: ovs-vsctl set-controller <bridge> ptcp: This is a somewhat unusual configuration. Usually, ovs-ofctl commands are run locally and just use a Unix domain socket, or a controller is running on a remote system and OVS establishes the OpenFlow connection. Rarely, do we configure OVS to listen for a TCP-based OpenFlow connection. --Justin On Jan 9, 2014, at 2:19 PM, Alex Nelson <[email protected]> wrote: > It's giving connection refused. > > controller:~> ovs-ofctl dump-aggregate tcp:10.1.5.3:6633 > ovs-ofctl: connecting to tcp:10.1.5.3:6633 (Connection refused) > controller:~> ovs-ofctl dump-aggregate tcp:10.1.5.3 > ovs-ofctl: connecting to tcp:10.1.5.3 (Connection refused) > controller:~> > > > On Thursday, January 9, 2014 10:24 AM, Justin Pettit <[email protected]> > wrote: > By default, OpenFlow runs on port 6633 and OVSDB runs on port 6634. > ovs-ofctl uses the OpenFlow protocol, so I'd expect it to use port 6633. > What happens if you run ovs-ofctl either without the port specified or using > port 6633? > > --Justin > > > On Jan 9, 2014, at 10:06 AM, Alex Nelson <[email protected]> wrote: > >> I run it with the -vvconn option but I don't get much info: >> >> ovs-ofctl -vvconn dump-aggregate tcp:10.1.5.3:6634 >> 2014-01-09T17:54:02Z|00001|vconn|DBG|tcp:10.1.5.3:6634: sent (Success): >> OFPT_HELLO (xid=0x1): >> ovs-ofctl: connecting to tcp:10.1.5.3:6634 (Connection reset by peer) >> >> It seems it works fine from the client's side. Do I have to setup the DB at >> the OVS in any special way in order to have remote access through a socket? >> >> I have tried many different ways I found online including the following: >> >> ovsdb-server --remote=punix:/usr/local/var/run/openvswitch/db.sock \ >> --remote=db:Open_vSwitch,manager_options \ >> --remote=tcp:10.1.5.3:6634 >> --pidfile --detach >> but nothing... >> >> >> On Thursday, January 9, 2014 8:59 AM, Justin Pettit <[email protected]> >> wrote: >> >> On Jan 9, 2014, at 5:02 AM, Alex Nelson <[email protected]> wrote: >> >>> I'm trying to get aggregated stats about the installed flows of an OVS. >>> >>> I'm running: ovs-ofctl dump-aggregate tcp:10.1.5.3:6634 in one machine, >>> >>> and I get: ovs-ofctl: connecting to tcp:10.1.5.3:6634 (Connection reset by >>> peer) >> >> >> By default, OpenFlow runs on port 6633. I'd double-check your port numbers. >> If that doesn't work, then try Ben's "-vvconn" suggestion. >> >> --Justin >> >> >> >> >> _______________________________________________ >> discuss mailing list >> [email protected] >> http://openvswitch.org/mailman/listinfo/discuss > >
_______________________________________________ discuss mailing list [email protected] http://openvswitch.org/mailman/listinfo/discuss
