Hello, when I run this on console 1:
sudo ovs-vswitchd --pidfile
and this on console 2:
sudo mn --switch ovsk --controller ref --topo single,3
I got this on console 1:
2014-04-20T01:24:58Z|00001|reconnect|INFO|unix:/usr/local/var/run/openvswitch/db.sock:
connecting...
2014-04-20T01:24:58Z|00002|reconnect|INFO|unix:/usr/local/var/run/openvswitch/db.sock:
connected
2014-04-20T01:24:58Z|00003|bridge|INFO|ovs-vswitchd (Open vSwitch) 2.1.90
2014-04-20T01:25:01Z|00004|dpif|WARN|system@ovs-system: failed to
put[create][modify] (Invalid argument)
skb_priority(0),skb_mark(0),recirc_id(0x1),dp_hash(0x1),in_port(0),eth(src=00:00:00:00:00:00,dst=00:00:00:00:00:00)
2014-04-20T01:25:01Z|00005|ofproto_dpif|INFO|system@ovs-system: Datapath
does not support recirculation
2014-04-20T01:25:01Z|00006|dpif|WARN|system@ovs-system: failed to
put[create][modify] (Invalid argument)
skb_priority(0),skb_mark(0),in_port(0),eth(src=00:00:00:00:00:00,dst=00:00:00:00:00:00),eth_type(0x8847),mpls(label=0,tc=0,ttl=0,bos=1)
2014-04-20T01:25:01Z|00007|ofproto_dpif|INFO|system@ovs-system: MPLS
label stack length probed as 0
2014-04-20T01:25:01Z|00008|bridge|INFO|bridge s1: added interface s1 on
port 65534
2014-04-20T01:25:01Z|00009|bridge|INFO|bridge s1: using datapath ID
00004a335765d64b
2014-04-20T01:25:01Z|00010|connmgr|INFO|s1: added service controller
"punix:/usr/local/var/run/openvswitch/s1.mgmt"
2014-04-20T01:25:01Z|00011|dpif_linux|WARN|system@ovs-system: failed to
set upcall pid on port: Numerical result out of range
2014-04-20T01:25:01Z|00012|dpif_linux|WARN|system@ovs-system: failed to
set upcall pid on port: Numerical result out of range
2014-04-20T01:25:01Z|00013|dpif|WARN|system@ovs-system: handlers_set
failed (Numerical result out of range)
2014-04-20T01:25:01Z|00014|ofproto_dpif_upcall|ERR|failed to configure
handlers in dpif system@ovs-system: Numerical result out of range
2014-04-20T01:25:01Z|00015|bridge|INFO|bridge s1: using datapath ID
0000000000000001
2014-04-20T01:25:01Z|00016|dpif_linux|WARN|system@ovs-system: failed to
set upcall pid on port: Numerical result out of range
2014-04-20T01:25:01Z|00017|dpif_linux|WARN|system@ovs-system: failed to
set upcall pid on port: Numerical result out of range
2014-04-20T01:25:01Z|00018|dpif|WARN|system@ovs-system: handlers_set
failed (Numerical result out of range)
2014-04-20T01:25:01Z|00019|ofproto_dpif_upcall|ERR|failed to configure
handlers in dpif system@ovs-system: Numerical result out of range
2014-04-20T01:25:01Z|00020|bridge|INFO|bridge s1: added interface
s1-eth1 on port 1
2014-04-20T01:25:01Z|00021|bridge|INFO|bridge s1: added interface
s1-eth2 on port 2
2014-04-20T01:25:01Z|00022|bridge|INFO|bridge s1: added interface
s1-eth3 on port 3
2014-04-20T01:25:01Z|00023|connmgr|INFO|s1: added service controller
"ptcp:6634"
2014-04-20T01:25:01Z|00024|connmgr|INFO|s1: added primary controller
"tcp:127.0.0.1:6633"
2014-04-20T01:25:01Z|00025|rconn|INFO|s1<->tcp:127.0.0.1:6633: connecting...
2014-04-20T01:25:01Z|00026|dpif_linux|WARN|system@ovs-system: failed to
set upcall pid on port: Numerical result out of range
<=======>
This only happens with version 2.1.90, the version 2.1.0 doesn't have
any problems.
Thanks,
André Martins
_______________________________________________
discuss mailing list
[email protected]
http://openvswitch.org/mailman/listinfo/discuss
